Epson C850071 - RIP Station 5000 User Manual page 34

T
O EDIT A SIMULATION IN
1. Open ColorWise Pro Tools and click either Color Editor or Profile Manager.
2. Choose the simulation you wish to edit and click Select (Color Editor) or Edit (Profile
Manager).
3. Choose TRI from the Edit Mode drop-down menu and select the Print Mode option with
which your edited simulation will be linked.
In the example above, the Euroscale simulation is being edited for use with the PQ Inkjet
Paper 720 Print Option.
Simulations edited in TRI mode must be linked to a specific Print Mode.
N :
OTE
4. Edit and save the simulation as described in step 4 through step 8 on page 32.
If you select this new simulation for a print job for which the Print Mode option is PQ
Inkjet Paper 720, your TRI simulation is automatically applied. If the Print Mode option is
set to something other than PQ Inkjet Paper 720, then the Master simulation is applied.
A custom simulation can consist of a custom master simulation and/or up to 15
N :
OTE
custom linked simulations (one for each Print Mode).
TRI :
MODE
Page 34