Options Adjustments - Panasonic TH-50PH12L Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Item
Weekly Command Timer Sets Weekly Command Timer. (see page 48)
On:
• Power on display
• Input signal switch display
Onscreen display
• No signal display
• Mute and the remaining time of off-timer after
Off:
Off
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 17)
Initial INPUT
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when "INPUT lock" is "Off".
• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.
(Ex. INPUT1A, INPUT1B)
Press
Off
Off:
On:
Initial VOL level
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press
Off
Off:
On:
Notes:
Maximum VOL level
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Press to display the SET UP menu.
Press to select "OSD LANGUAGE".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Displays all the following on screen.
Hides all the items above from view.
PC INPUT1 INPUT2
button to adjust the volume when the unit is turned on.
On
Sets normal volume.
Sets your preferred volume.
button to adjust the maximum volume.
On
Sets auto maximum volume.
Sets your preferred maximum volume.
Options
Shipping
Adjustments
was pressed.
INPUT3
Options 1/3
Weekly Command Timer
Onscreen display On
Initial INPUT O f f
Initial VOL level Off 0
Maximum VOL level Off 0
INPUT lock Off
Button lock
Off
Remocon User level
Off
Advanced PIP
Off
Options 2/3
Off-timer function
Enable
Initial Power Mode
Normal
ID select
0
Remote ID
Off
Serial ID
Off
Display size
Off
Studio W/B
Off
Studio Gain
Off
3/3
Options
Slot power O f f
Power On Screen Delay Off
Clock Display Off
All Aspect Off
Auto Setup Manual
Rotate Off
Serial Slot Select Slot1
45