Remote Control Transmitter - Panasonic TH-50PH12L Operating Instructions Manual

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 20)
Standby (ON / OFF) button
The Plasma Display must ¿ rst be plugged
into the wall outlet and turned on at the
power switch (see page 15).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
POS. /SIZE button
(see page 25)
PICTURE button
(see page 27)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 26, 27, 28, 29)
POSITION buttons
INPUT button
Press to select INPUT1, INPUT2, INPUT3
and PC input SLOTS sequentially. (see
page 17)
When a dual input terminal board is
attached, A or B is displayed depending
on the selected input signal. (Ex.
INPUT1A, INPUT1B)
MULTI Window buttons
(see page 21)
Basic Controls
OFF TIMER button
The Plasma Display can be preset to switch to stand-
by after a ¿ xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30 60
When three minutes remain, "OFF TIMER 3" will À ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 25)
SET UP button (see page 24)
SOUND button (see page 29)
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 24)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode (see page 20)
2
Off timer
3
The off timer indicator is displayed only
when the off timer has been set.
Clock display (see page 47)
4
4 10:00
Digital Zoom (see page 23)
90
0
PC 1
4:3
2
OFF TIMER 90 3
19