Kx-Td Series Pbx Programming For Inband Integration; Kx-Td Series Pbx Programming Via The Manager's Extension; Kx-Td Series Pbx Programming Via The Operating And Maintenance Tool - Panasonic KX-TVA594 Installation Manual

5.5 KX-TD Series PBX Programming for Inband
Integration
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
DPT Integration is recommended when using the VPS with the KX-TA1232, KX-TD816, or KX-
TD1232, however, Inband Integration is necessary when the software version of the PBX does not
support DPT Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer
to the documentation included with the PBX or consult your dealer for more information.
5.5.1 KX-TD Series PBX Programming via the Manager's
Extension
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
Select a maximum of 2 extension ports to be connected to the VPS. Plug each extension into a Voice
Mail port.
Go to System Program [602] and assign the Voice Mail extensions to a different extension group. By
default, all extensions are in Extension Group 1.
Go to System Program [106] and assign the new Extension Group to Auto Attendant (AA).
5.5.2 KX-TD Series PBX Programming via the Operating and
Maintenance Tool
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
1.
Go to the Main Menu. Choose "System Data Programming".
(BATCH [1] or INTERACTIVE [2]).
•
•
Before choosing Batch Programming, you must open a file in the Disk File Management
Menu (Item 3).
Before choosing Interactive Programming, you must connect with the system in the
DSHS Connect/Disconnect menu.

5.5 KX-TD Series PBX Programming for Inband Integration

Installation Manual 151