Installing Prompt Data For The Vm Menu Feature - Panasonic KX-TVA594 Installation Manual

c)
Program the PBX so that it will direct overflowed calls to the ICD group's mailbox.
1)
Go to the "Groups-VM(DPT) Group-System Setting" screen.
2)
Select "Enable" as the parameter for "Intercept to Mailbox".
3)
Click "Apply" to save the changed data.
4.
Make sure all installation and line connections have been done as described in Section 2
Installation.
5.
Connect the jack assigned in Step 2 to the VPS.
6.
Complete the PBX-VPS connection by following from step 1 of 4.7 Completing the PBX-VPS
Connection.

Installing Prompt Data for the VM Menu Feature

KX-TDA series PBXs (MPR version 2.0 or higher) can use the VM Menu feature, however, VM Menu
prompt data must first be installed in the PBX using the following procedure.
1.
Shutdown the PBX, eject the SD memory card, and insert the SD memory card into your PC.
2.
Insert the CD-ROM included with the VPS into your PC's CD-ROM drive.
3.
Find the following folder: CD-ROM Drive:\VM_prompt\VM_Menu\.
4.
Copy the 5 files (DVMLNG1 to 5) in this folder to the following folder on the SD memory card: SD
Memory Card:\PRIVATE\MEIGROUP\PCC\PBX.
5.
Eject the SD memory card, insert it into the PBX, and start the PBX.
4.2 KX-TDA and KX-TAW Series PBX Programming for DPT Integration
Installation Manual 103