Completing The Pbx-Vps Connection - Panasonic KX-TVA594 Installation Manual

4.7 Completing the PBX-VPS Connection

4.7 Completing the PBX-VPS Connection
Once you have finished installing all optional cards, connecting all telephones to the PBX, and
configuring the PBX for APT/DPT Integration, proceed with the following steps to complete and test
the PBX-VPS connection.
1.
Start KX-TVA Maintenance Console (see 3.2 KX-TVA Maintenance Console Installation).
2.
Using KX-TVA Maintenance Console, initialize the PBX (see 7.1 Initializing the VPS).
3.
Start the Quick Setup utility and proceed with Quick Setup (see 6.1.2 Quick Setup).
4.
Click "Utility" on the menu bar.
5.
Select "Port Status".
6.
Make sure each line connecting the PBX and VPS is shown as being "Ready".
124 Installation Manual