Factory Restore - DigiTech JAMMAN - MANUAL 2 Owner's Manual

Factory Restore

This procedure will return the JamMan
settings. All internal loop memories will be reformatted and the original
10 loops that shipped with the JamMan Stereo will be restored. Factory
Restore does not affect any loops on the optional external SD memory card.
WARNING: The Factory Restore procedure will erase all loops
from the JamMan Stereo internal memory and restore it to
its factory state. This procedure is permanent and cannot be
reversed. Use the Factory Restore procedure with caution. It is
recommended you back up your internal loops to your computer
with the JamManager
1. Press and hold the
Stereo.
2. When the display shows
be flashing.
3. Press the
if you are sure you want to restore the internal memory to its factory
state. To abort this procedure at this time, press the EXIT button.
4. To confirm the restore procedure, press and hold the
until bu appears in the Display. The JamMan Stereo will return to normal
operation shortly as indicated by loop memory 1 being shown in the
Display.
58
software and USB connection.
TM
STORE button while powering up the JamMan
Fr, release the STORE button which will now
STORE button again. This display will now show r? asking
Stereo to its original factory
®
STORE button