Scrambler - Kenwood TK 3200U2P - Protalk UHF - Radio Instruction Manual

■ Temporary Delete
You can temporarily remove specific channels from the
scanning sequence during Scan. When Scan pauses at a
channel, you can remove that channel from the scanning
sequence by pressing and holding the key programmed as
Temporary Delete for 1 second or Scan + Temporary
Delete for 3 seconds.
• You cannot remove a channel if there will be less than
2 channels available for scanning remaining.
• To add the removed channels back into the Scan list, simply
exit Scan mode or switch the transceiver power OFF and then
ON again.
S
CRAMBLER
Whereas the Quiet Talk and Digital Quiet Talk functions
{page 16} allows you to ignore unwanted calls, Scrambler
allows you to hold a conversation in complete privacy. When
activated, any other party listening in on your channel will be
unable to understand your conversation. The transceiver
scrambles your voice so that anybody listening to your
conversation will not be able to understand what you are
saying.
In order for members of your own group to understand your
call while you are using the Scrambler, all other members
must also activate the Scrambler on their transceivers. This
scrambles everybody's voice while transmitting and
unscrambles the voice message on your own transceiver
when you receive the message.
To activate the Scrambler, press the key programmed as

Scrambler.

To deactivate the Scrambler, press the Scrambler key again.
30