Vox Operation - Kenwood TK 3200U2P - Protalk UHF - Radio Instruction Manual

VOX O
PERATION
Set up a VOX Gain level from 1 to 10 {page 10}.
1
To transmit, simply speak into the headset microphone.
You do not need to press the PTT switch; the transceiver
2
automatically detects your voice and begins transmitting.
To stop transmitting, stop speaking.
Transmission will continue momentarily after you stop
3
speaking, so ensure your transmission will not be cut off.
To exit VOX mode, set the VOX Gain level {page 10} to
4
OFF.
Note:
◆ While transmitting via VOX, all keys other than power OFF are
disabled.
◆ When you operate the VOX function, you must use an optional
KHS-1 or KHS-22 accessory.
◆ VOX will not operate when the battery level becomes too low.
(The LED will flash red in this state.)
12