ITech IT2800 Series User Manual page 31

8. Y-axis offset value
1.6.3 Recorder
This function is used to record the voltage measurement value, current
measurement value, power measurement value, resistance measurement
value, source output value, and mathematical calculation value during the test
operation, and draw these data into easy-to-observe curves or generate .csv /
The file in .tdms format is exported to the U disk.
To access the Recorder interface:
Press the [Menu] key, enter Menu→Recorder.
The interface features are described as follows.
To set: Press the corresponding area of the touch screen (or turn the knob
until the area is selected and then press [Enter]), and then turn the knob to
adjust.
The yellow T icon on the Y-axis indicates the voltage or current trigger value.
To set: Press the corresponding area of the touch screen (or turn the knob
until the area is selected and then press [Enter]), and then turn the knob to
adjust.
Adjusting this parameter is supported only when the
Scope→Setting→Trigger Source is selected as Voltage or Current.
Copyright © Itech Electronic Co., Ltd.
Quick Reference
20