Start-Up Problems; Post Error Messages - NEC VERSA LX Manual

Start-Up Problems

The system displays an invalid configuration error message at power on
when there are the following conditions:
!
the current configuration information doesn't match configuration
information stored in Auto Setup, such as when an internal option is
added.
!
the system loses configuration information.
If either condition is true, the system displays an "invalid configuration
information" message.
To continue start-up procedures, press
the Setup utility to set current system parameters.
If an error message appears before the operating system starts, look up
the error message in the following table. Follow the instructions. If you
see other error messages, the hardware might need repair.

Post Error Messages

The NEC Versa LX computer has a built-in checking program that
automatically tests its components when you turn the system power on.
This diagnostic test is called the Power-On Self-Test (POST). If the
system finds a problem during the POST, the system displays an error
message or emits a series of beep signals. If this happens, follow the
instructions in the POST Error Messages table or the Beep Code table, as
appropriate.
7-4 Solving System Problems
Note:
When the NEC Versa detects an error
related to display devices, it cannot display on either
the LCD or a CRT. The system warns you by
beeping.
(or when prompted) and run
F2 F1