Increasing System Storage And Memory; Hard Disk - NEC VERSA LX Manual

4. Use the
IRQ3. (Be sure to check your available resources before making a
selection.)
5. Press
6. Save your settings and exit the BIOS Setup utility.
For the infrared technology to work, you need to follow these guidelines:
!
Position the NEC Versa no more than three feet way from the IR
peripheral device you are using.
!
Make sure there is no greater than a 30° angle between the computer
and the device.

Increasing System Storage and Memory

As your needs grow and change, you may need to add an optional hard
disk drive with a greater capacity or additional memory. Read the
following sections to learn how to install an optional hard disk drive or a
memory module.

Hard Disk

You can increase the system's storage capacity by replacing the standard
hard disk drive or adding a second hard disk drive in the VersaBay III.
Adding a second hard disk drive is described in the section
"Customizing Your System with the VersaBay III."
The hard disk drive is located under the battery bay in your NEC Versa
notebook computer. You must remove the system's main battery before
replacing the hard disk drive. Replace the hard disk drive as follows.
1. Save your files, exit Windows, and turn off system power.
2. Close the LCD and turn over the system.
4-26 Using the Hardware
keys to change the default value to COM4,
PgUp/PgDn
to return to the BIOS main menu.
ESC