Using The Ir Port - NEC VERSA LX Manual

Using the IR Port

For optimal performance when using the IR (infrared) port for file
transfer, printing, and other infrared communication, install the required
drivers and applications. Check that the IR port is enabled via the BIOS
Setup utility (Windows NT) or the Customize icon (Windows 95). Use
the NEC Versa LX Application and Driver CD that ships with your NEC
Versa LX system to install the following IR drivers and applications.
!
The NEC Versa Fast Infrared Support driver (Windows 95)
!
The Intellisync for Notebooks application (Be sure to read the
Intellisync installation instructions before installing.)
For details about using the Application and Driver CD to install
additional software, see Chapter 3 "Using the Software."
4-24 Using the Hardware
Your NEC Versa ships with the IR port disabled.
Before using the IR port for the first time, you must
enable the device. See detailed instructions in the
section that follows.
Note:
The Windows 98 operating system is
equipped with infrared drivers for infrared
communication on your NEC Versa. It is not
necessary to install the IR drivers from the
Application and Driver CD when using the Windows
98. The IR drivers on the Application and Driver CD
are for Windows 95 use, only.