Removal - NEC VERSA DOCKING STATION 4000 Manual

Removal

4-12 Adding Options
Follow these steps to remove an industry standard, 8- or 16-
bit expansion board from the docking station.
Prepare for board removal as follows:
1.
n
Disconnect and remove the NEC Versa from the
docking station.
n
Turn off and unplug the docking station.
n
Disconnect any peripheral devices connected to the
docking station.
n
Remove the docking station cover. See "Cover Re-
moval" earlier in this section for information on re-
moving the cover.
n
Position the docking station so you have access to the
side where the expansion slots are located.
Be careful not to drop anything into the docking sta-
tion. Doing so can damage the unit.
CAUTION