Creating A Start-Up Diskette; Creating A Second Configuration File - NEC VERSA DOCKING STATION 4000 Manual

Creating a Start-Up Diskette

Creating a Second Configuration File

3-16 Setting Up and Using the Software
Create a start-up diskette as follows. (For details, see the
MS-DOS user's guide that came with the NEC Versa.)
If your system is in Windows, exit Windows.
1.
From the DOS prompt (C:>), type the following com-
2.
mand to format a diskette in drive a: using the
Press
Enter
a different diskette drive, use the correct drive letter.)
format a: /s
At the prompt, insert a blank diskette and press
3.
begin formatting.
Once the diskette is formatted, enter a volume name and
4.
press Enter or press
Type when prompted to format another diskette and
5. N
press Enter .
While the diskette is still in the drive, type the following
6.
and press
Enter
diskette.
copy c:\config.sys a:\*.*
Type the following and press
7.
AUTOEXEC.BAT file to diskette.
copy c:\autoexec.bat a:\*.*
Remove the diskette from the drive, label it, and store it
8.
in a safe place.
Keep your current configuration files available for use, by
copying them with a different name to the current directory
as follows.
after typing the command. (If you are using
Enter to skip naming the volume.
to copy the CONFIG.SYS file to the
to copy the
Enter
/s option.
to
Enter