NEC VERSA 4000 Manual page 73

MESSAGE
System CMOS
Checksum Bad – run
Setup
or
Press (F1) to resume,
(F2) to setup.
Fixed disk configuration
error
Fixed disk failure
Fixed disk controller
failure
Keyboard clock line
failure
Keyboard data line
failure
Keyboard controller
failure
POST Error Messages
WHAT TO DO
Press F2 to enter Setup. Under Exit, set the default
values. Under Main, set the date and time. Save
your changes and exit.
Start Setup. Exit and save to update the parameters.
Check to see if the hard disk connector is seated
properly. If there is still a problem, the hard disk
might need repair.
Press F2 to start Setup. Exit and save to update the
parameters.
Check to see if the hard disk connector is seated
properly.
If there is still a problem, the hard disk might need
repair.
Press F2 to start Setup. Exit and save to update the
parameters.
Check to see if the hard disk connector is seated
properly.
The hard disk controller does not work and might
need repair.
Unplug external keyboard if attached. Have the
keyboard repaired.
Unplug external keyboard if attached. Have the
keyboard repaired.
Unplug external keyboard if attached and reboot the
system. If it still fails, have the keyboard repaired.
NOTE
Repeated keystrokes during boot may
produce an error message .
Solving Problems 5-5