Time And Date Stamp; Time And Date Stamp With Caller Id - NEC DSX Software Manual

Time and Date Stamp

Description
A mailbox user can listen to a message and dial a code to hear the time the message was sent,
as well as the caller's number.
While listening to a message, a Subscriber Mailbox user can dial
was left. This is a handy option while reviewing messages. The subscriber can just dial a code to find out
when the message arrived.

Time and Date Stamp with Caller ID

With caller ID installed, a mailbox user can dial
the time the message was sent, as well as the caller's number. This capability is always available for mes-
sages left by an Intercom caller.
Conditions
• None
Default Setting
• Enabled
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in the
connected telephone system.
Other Related Features
Features
None
IntraMail Features
Auto Time Stamp (page 431)
After a user listens to a message, IntraMail can optionally announce the time and date the message
was left.
Caller ID (page 63)
With Caller ID installed and programmed, the Time and Date Stamp for outside calls also includes the
caller's number.
Listening to Messages (page 512)
Turn to this feature for additional listening options.
Time and Date (page 349)
You can set the system Time and Date from the telephone system programming or using the User-Pro-
grammable Features.
DSX Software Manual
Time and Date Stamp
TI to hear the Time and Date the message
TI while listening to a message from an outside caller to hear
IntraMail Features ◆ 581