Handsfree Transfer; Hotline Automatic Transfer; User Programmable Features - NEC DSX PRODUCT DESCRIPTION Manual

The extension to which the call was initially transferred.
❥

Handsfree Transfer

Handsfree Transfer allows an extension user to Transfer an outside call directly to a co-worker's speakerphone.

Hotline Automatic Transfer

With Hotline Automatic Transfer, the extension can Transfer their call to a co-worker just by pressing their
Hotline key and hanging up. Without Hotline Automatic Transfer, the user must press TRANSFER before
pressing the Hotline key. If the user frequently uses their Hotline key for one-button Transfer to co-workers,
Hotline Automatic Transfer is recommended. If the user prefers to consult with their Hotline partner rather
than Transfer, disabling Hotline Automatic Transfer would be helpful.
• Pressing TRANSFER + Call Coverage Key can Transfer a call to an uninstalled extension's mailbox
(if the mailbox is enabled).
• Pressing a Hotline key can also Transfer a call to an uninstalled extension's mailbox (if the mailbox is
enabled).

User Programmable Features

Extension users can set up their telephones to meet their own unique requirements.
User Programmable Features allow an extension user to dial mnemonics to customize the way certain features
work on their telephone. With User Programmable Features, there is no need to rely on a System Administra-
tor or Communications Manager to set up each phone. These User-Programmable Features include:
Call Forwarding Clear All
❥
Direct Station Selection (DSS) Assignment
❥
Feature Key Assignment
❥
Feature Key Ringing for Call Coverage Keys, Group Call Pickup Keys, and Line Keys
❥
Headset Mode
❥
Hotline Key Assignment
❥
Off Hook Signaling Setup (including Camp-On, Off Hook Ringing for outside calls, and Voice Over for
❥
Intercom calls)
Paging (Incoming)
❥
Prime Line Assignmen
❥
Programmable Idle Menu Soft Keys (Super Display)
❥
Ringing Line Preference
❥
Speed Dial Bin Setup (Personal and System)
❥
Time and Date
❥
Voice Announce (For incoming Intercom calls)
❥
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y , then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature
Call Forwarding Clear All
Headset Mode
Hotline
78 ◆ Features
User Programmable Features
Mnemonic Numeric
#CC #22
#HS #47
#HL #45
Operation
#CC + Y to clear (cancel) forwarding or N to
exit without clearing + SPEAKER to hang up.
+ Y to enable or N to disable + SPEAKER
#HS
to exit.
#HL + Press flashing Hotline key + Enter exten-
sion for new Hotline partner + HOLD + Pro-
gram another Hotline key or SPEAKER to exit.
Access Level
4 and 5
3-5
3-5
DSX Product Description