Panasonic TV-43W80AEY Operating Instructions Manual page 14

your remote has a built-in microphone) and ask Alexa
to find what you're looking for or you can type a word
to start a search. Library will show any content that
you have added to your Watchlist.
Live TV
Live TV refers to channels that have been tuned in via
an aerial, cable and satellite connection. There are
several ways to watch Live TV channels. You can press
the Live button on the remote (availability depends on
the model of the remote) to switch to Live TV mode
and watch TV channels. You can also select a channel
from the On Now row in the Home tab or Live tab,
or select the Aerial or Satellite input option from the
Inputs menu or the Inputs row in the Inputs tab on the
Home screen and press Select to start watching. Press
the Input button to open the Inputs menu (availability
depends on the model of the remote).
If the channel installation is not completed the On Now
row will not be available.
Customising TV Settings
Adjusting the Picture Settings
Allows you to set your preferred picture settings. You
can access the picture settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for about 2 seconds while viewing
any input.
Accessing Picture Settings via Settings Menu
Press the Home button, scroll to Settings tab. Scroll to
Display & Audio option and press the Select button.
Highlight the Picture Settings option and press the
Select button. Scroll down to select the input that you
want to adjust the picture setting of and press Select
button. The TV will now change to the selected input.
The Picture Settings menu will appear on the right
hand side of the screen.
Accessing Picture Settings while watching the TV
While watching the input that you would like to adjust
press and hold the Home button for 2 seconds. The
quick settings menu will appear on the right hand side
of the screen. Scroll down and highlight Picture then
press Select. The picture setting options will appear
on the right hand side of the screen.
Picture Menu Content
The following options show all the available picture
setting adjustment on your TV.
Picture settings are input-specific and all of these
settings will not apply to all Inputs. Some options may
not be available depending on the input source.
Viewing Mode: Set the viewing mode to suit your
preference or requirements. Viewing mode can be set
to one of these options: Dynamic, Normal, Cinema,
Filmmaker, True Cinema, Sport and Game. Available
options may differ depending on the currently set
input source.
Backlight: Increases or decreases the brightness of
the backlight from 0 - 100.
Contrast: Adjusts the difference between light and
dark levels in the picture. The range is from 0-100.
Brightness: Increases or decreases the picture
brightness from 0-100.
Colour: Adjusts the difference between light and dark
levels in the picture. The range is from 0-100.
Tint: Increases or decreases the picture tint from -50
(greens) to 50 (reds).
Sharpness: Adjusts the level of crispness in the edges
between light and dark areas of the picture. Range is
from 0-100.
Colour Temperature: Sets the desired colour
temperature value. Cool, Normal, Warm 1 and Warm
2 options are available.
Vivid Colour: Sets the desired vivid colour value.
High, Middle, Low and Off options are available.
Adaptive Backlight Control:
backlight according to input picture in order to provide
energy efficiency and good contrast feeling.
Off and Eco options are available. For lower power
consumption, select the Eco option.
Noise Reduction: Noise Reduction has 4 different
setting High, Middle, Low and Off. Highlight your
desired setting then press Select.
MPEG Remaster: High, Middle, Low and Off options
will be available. Highlight your desired option then
press Select.
Resolution Remaster: Resolution Remaster can be
switched on or off.
Intelligent Frame Creation: Intelligent Frame
Creation has 4 different settings; High, Middle, Low
and Off. Highlight your desired setting then press
Select.
Advanced Settings
Contrast Control: Divides each frame to small
regions and applies independent contrast curves
for every distinct region. Contrast Control has 4
different setting Off, Low, Medium, High. Highlight
your desired setting then press Select.
Local Contrast Enhancement: Local Contrast
Enhancement has 4 different settings; High, Middle,
Low and Off. Highlight your desired setting then
press Select.
English - 13 -
Automatically adjusts
On,