Advertisement
Quick Links
Advertisement
Related Manuals for DeWalt DCM565P1
Summary of Contents for DeWalt DCM565P1
- Page 1 DCM565 DCM565...
- Page 2 Fig. A Fig. B Fig. C Copyright D WALT...
- Page 3 Fig. D Fig. E Fig. F Fig. G Fig. H Fig. I Fig. J Fig. K...
- Page 4 Fig. L Fig. M Fig. N Fig. O Fig. P Fig. Q 60° Fig. R Fig. S 0.635 mm...
- Page 5 English 18V CHAINSAW DCM565 Congratulations! WALT declares that these products described under Technical Data are in compliance with: You have chosen a D WALT tool. Years of experience, thorough 2006/42/EC, EN62841-1:2015+A11:2022, EN62841-4-1:2020. product development and innovation make D WALT one of the 2000/14/EC, Annex V most reliable partners for professional power tool users.
- Page 6 English Batteries Chargers/Charge Times (Minutes)*** DCB112/ DCB115/ Weight (kg) DCB104 DCB107 DCB113 DCB116 DCB117 DCB118 DCB132 DCB119 Cat # DCB1102 DCB1104 DCB546 18/54 6.0/2.0 1.08 DCB547/G 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.46 DCB549 18/54 15.0/5.0 2.12 DCB181 0.35 DCB182...
- Page 7 English f ) If operating a power tool in a damp location is f ) Keep cutting tools sharp and clean. Properly maintained unavoidable, use a residual current device (RCD) protected cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Page 8 English c ) Hold the chain saw by insulated gripping surfaces only, position your body and arm to allow you to resist kickback because the saw chain may contact hidden wiring. Saw forces. Kickback forces can be controlled by the operator, if proper precautions are taken.
- Page 9 English • Kickback, Rotational ‑ The rapid upward and backward to significantly reduce the number and seriousness of kickbacks when tested in accordance with safety requirements for electric motion of the saw which can occur when the moving saw chain chain saws.
- Page 10 English 3 Li-Ion battery packs (C3, D3, G3, L3, M3, P3, S3, T3, X3, Y3 Chain brake/front hand guard models) Guide bar 1 Instruction manual Saw chain nOTE: Battery packs, chargers and kitboxes are not included Sprocket cover with B models. Battery packs and chargers are not included with Battery Pack N models.
- Page 11 English To actuate the fuel gauge, press and hold the fuel gauge 2. To adjust saw chain tension, flip up locking tab and rotate button . A combination of the three green LED lights will the bar adjust locking knob counterclockwise one full turn.
- Page 12 English 3. Periodically switch the chain saw off and check the oil level 2. To engage the chain brake, push the chain brake/front hand indicator to ensure the bar and chain are being properly oiled. guard forward until it clicks into place. 3 ...
- Page 13 English • Before felling is started, consider the natural lean of the tree, 4. Once the chainsaw gets to a 45 ° angle, level the chainsaw the location of larger branches and the wind direction to judge again and repeat steps until you cut fully through. which way the tree will fall.
- Page 14 English Saw Chain Sharpness (Fig. Q‑S) DCM565 TROUBLESHOOTING CAUTION: Sharp chain. Always wear protective gloves when Problem Solution handling the chain. The chain is sharp and can cut you when it is Unit will not start. • Check battery installation. not running. • Check battery charging requirements. iMPORTAnT: The chain cutters will dull immediately if they touch the ground, stones, masonry or a nail while cutting.
- Page 16 Belgique et www.dewalt.be WALT ‑ Belgium BVBA Tel: NL 32 15 47 37 63 luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@sBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark www.dewalt.dk WALT (Stanley Black&Decker AS)
Need help?
Do you have a question about the DCM565P1 and is the answer not in the manual?
Questions and answers