dji Osmo Pocket 3 User Manual

Hide thumbs Also See for Osmo Pocket 3:

Download this manual

Osmo Pocket 3 User Manual

Introduction

DJI Osmo Pocket 3 is a handheld gimbal camera with three-axis mechanical stabilization, which is capable

of shooting stable and smooth videos in various scenarios. The 1-inch CMOS sensor ensures low-noise,

high-quality footage in high-contrast environments. In addition, the 10-bit D-Log M color mode provides a

more comfortable color perception and a larger dynamic range, which is convenient for post-production color

correction.

The rotatable touchscreen of Osmo Pocket 3 allows users to check the live view of the camera, rotate to start

recording, tap to adjust the settings, and can also be used to switch between horizontal and vertical shooting

modes. Osmo Pocket 3 adopts a built-in three-mic array, which can effectively reduce wind noise and record

stereo sound. It also supports the connection of external mies and monitoring earphones. Users can enjoy

more with a variety of optional accessories such as Osmo Pocket 3 Handle With 1/4" Thread, Osmo Pocket

3 Battery Handle, Osmo Mini Tripod, and Osmo Pocket 3 Wide-Angle Lens.

Need help?

Do you have a question about the Osmo Pocket 3 and is the answer not in the manual?

Page 1 The rotatable touchscreen of Osmo Pocket 3 allows users to check the live view of the camera, rotate to start recording, tap to adjust the settings, and can also be used to switch between horizontal and vertical shooting modes.
Page 2 Inserting Micro SD Card The footage shot on Osmo Pocket 3 can only be stored on a microSD card (not included). A UHS-I Speed Grade 3 rating microSD card is required due to the fast reading and writing speeds necessary for high- resolution video data.
Page 3 Use the Type-C to Type-C PD cable (included) to connect a USB-C charger (not Included) to the USB-C port at the bottom of Osmo Pocket 3. It Is recommended to use the DJI 65W Portable Charger, DJI 30W USB-C Charger, or other USB-C Power Delivery chargers.
Page 4 * Tested in a laboratory environment with the DJI 65W PD charger (sold separately). When the handle or battery handle is mounted, use the USB-C port on the rear of the handle for charging. If the battery handle is mounted, the battery handle will not start charging until the battery of the handheld gimbal camera is fully charged.
Page 5 Timelapse Select from Hyperlapse, Timelapse, Motionlapse. In this mode, camera turns long events into short videos by taking a frame of video at set intervals. · Hyperlapse record smooth timelapse videos when camera is in motion such as in a car or when held in the hand. ·...