Related Manuals for MACHINIST X99 PR9
Summary of Contents for MACHINIST X99 PR9
- Page 1 •X99 PR9 User Manual (English) •X99 PR9 Benutzerhandbuch (Deutsch) •X99 PR9 Manual do usuário (Português) •X99 PR9 Manual del usuario (Lengua española)
- Page 2 X99 PR9 User Manual (English)
- Page 3 Any problem, please feel free to contact us. Contents Specifications ......................1 Overview of Components ................. 2 Install CPU & Fan..................... 3 Install Memory......................4 Install Expansion Card....................5 Back Panel Connectors.................... 5 USB 2.0 Port......................5 USB 3.0 Port......................5 RJ45 LAN Port....................6 Audio Port......................
- Page 4 Any problem, please feel free to contact us. Specifications X99 PR9 Processor Intel Xeon E5 LGA2011‐3 series processor Southbridge Q85 Chipset Technology 4‐channel DDR4 2133/2400/2666/3000/3200MHz Maximum Capacity 128GB (32GB*4) Memory Slot 4 * DDR4 6 * USB 2.0；2 * USB3.0...
- Page 5 Any problem, please feel free to contact us. Overview of Components Package List: X99 PR9 Motherboard * 1 SATA Cable * 1 I/O Blocking * 1 LGA2011‐3 Cooler Bracket Mounting Kit * 1...
- Page 6 Any problem, please feel free to contact us. Install CPU & Fan Please install the CPU into the CPU socket (LGA 2011‐3) as shown below. Important • Make sure that the motherboard supports the CPU. • Always unplug the power cord from the power outlet before installing or removing the CPU to prevent hardware damage.
- Page 7 Any problem, please feel free to contact us. Install Memory The motherboard provides 4 DDR4 DIMM slots, each with a maximum capacity of 32GB. 1. Wrench the latches on both sides of the memory slot outwards. 2. Insert the memory into the slot by aligning it with the notch in the slot. 3.
- Page 8 Any problem, please feel free to contact us. Install Expansion Card The motherboard provides 1 PCI Express 3.0 x16 expansion slot and 1 PCI Express 3.0 x1 expansion slot. Place the expansion card in an available PCI Express slot and press the expansion card until it is fully inserted into the slot.
- Page 9 Any problem, please feel free to contact us. The USB 3.0 supports the USB 3.0 specification and is compatible to the USB 2.0 specification. Use this port for USB devices. RJ45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1000Mbps/s data rate. The following describes the states of the LAN port LEDs.
- Page 10 Any problem, please feel free to contact us. Internal Connectors F_PANEL1 Connector SPK1 Connector F_AUDIO1 Connector This connector allows you to connect audio jacks on the front panel. Important • An incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it.
- Page 11 Any problem, please feel free to contact us. SATA1~3: SATA 3.0 Connectors These SATA 3.0 connectors are SATA 6Gb/s interface ports. Each SATA connector supports a single SATA device. M.2 Slot This motherboard has 1 M.2 slot, support NVME M.2/NGFF M.2 SSD. Insert your M.2 SSD into the M.2 slot at a 30‐degree angle.
- Page 12 Any problem, please feel free to contact us. JCMOS1: CMOS Discharge Important • Always turn off the computer and unplug the power cord from the power outlet before discharging.
- Page 13 Any problem, please feel free to contact us. ATXPWR1, PW1: Power Connectors With the use of the power connector, the power supply can provide enough stable power to all the components on the motherboard. Before connecting the power connector, make sure the power supply is turned off and all devices are properly installed.
- Page 14 Any problem, please feel free to contact us. CPU_FAN1~2: Fan Connectors CPU_FAN is a interface for CPU radiator. The 4pin fan has PWM intelligent speed regulation function, which can intelligently control the fan speed based on load and temperature changes. J_USBA1: USB 3.0 Connector The header conforms to USB 3.0 and USB 2.0 specification.
- Page 15 Any problem, please feel free to contact us. BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. BIOS identifies, configures, tests and connects computer hardware to the OS immediately after a computer is turned on. Its major functions include conducting the Power‐On Self‐Test (POST) during system startup, saving system parameters and loading the operating system, etc.
- Page 16 Any problem, please feel free to contact us. Enter BIOS Setup When the computer starts up, BIOS enters the self‐test process. When the self‐test is completed, the following message is displayed: Press DEL key to enter Setup Menu. At this time, Press <Delete>...
- Page 17 Any problem, please feel free to contact us. FAQs No Boot Press the computer boot button, the computer does not respond (fan does not rotate, indicator light does not light). 1. Clear CMOS. 2. Check whether the CPU model is compatible with the motherboard. 3.
- Page 18 Any problem, please feel free to contact us. randomly inserted, if you are not sure, please contact us through the online communication tool). 4. Check whether the CPU and memory model is compatible with the motherboard. 5. Replace the CPU, check whether the CPU is bad. 6.
Need help?
Do you have a question about the X99 PR9 and is the answer not in the manual?
Questions and answers