Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MACHINIST BTC-B250C
Summary of Contents for MACHINIST BTC-B250C
- Page 1 BTC-B250C User's Manual...
-
Page 2: Table Of Contents
Any problem, please feel free to contact us. Contents Specifications................1 Overview of Components ............... 2 Install CPU & Fan....................3 Install Memory.....................4 Back Panel Connectors..................5 USB 2.0 Port....................5 VGA Port......................5 USB 3.0 Port....................5 RJ45 LAN Port....................5 PS/2 Port......................6 Internal Connectors................... -
Page 3: Specifications
Any problem, please feel free to contact us. Specifications BTC B250C Support Intel 6th/7th Gen Core i3/i5/i7 (Intel Skylake full series), Xeon E3 Processor 1230V5, Celeron and Pentium series processors. Southbridge B250 Chipset Technology Dual channel DDR4 Maximum 32GB (16GB*2) Capacity Memory Slot 2 * DDR4... -
Page 4: Overview Of Components
Any problem, please feel free to contact us. Overview of Components Package List: B250C Motherboard * 1 SATA Cable * 1 — 2 —... -
Page 5: Install Cpu & Fan
Any problem, please feel free to contact us. Install CPU & Fan Please install the CPU into the CPU socket as shown below. Important • Make sure that the motherboard supports the CPU. • Always unplug the power cord from the power outlet before installing or removing the CPU to prevent hardware damage. -
Page 6: Install Memory
Any problem, please feel free to contact us. Install Memory The motherboard provides 2 DDR4 DIMM slots with a maximum capacity of 32GB. 1. Wrench the latches on both sides of the memory slot outwards. 2. Insert the memory into the slot by aligning it with the notch in the slot. 3. -
Page 7: Back Panel Connectors
Any problem, please feel free to contact us. Important • When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet to prevent hardware damage. • If the expansion card is not installed correctly, it may cause a short circuit throughout the metal pins, which could burn out the expansion card or the motherboard. -
Page 8: Ps/2 Port
Any problem, please feel free to contact us. The Gigabit Ethernet LAN port provides Internet connection at up to 1000Mbps/s data rate. The following describes the states of the LAN port LEDs. PS/2 Port This PS/2 port can be connected to a keyboard or mouse. Green: mouse. Purple: keyboard —... -
Page 9: Internal Connectors
Any problem, please feel free to contact us. Internal Connectors F_PANEL1 Connector SPEAK1 Connector Important • An incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it. — 7 —... -
Page 10: Sata 2.0 Connectors
Any problem, please feel free to contact us. 4*SATA 2.0 Connectors The theoretical speed of the SATA 2.0 port can reach 3Gb/s, which can meet all daily work activities. 4 SATA 2.0 ports can be used at the same time, and multiple lines ensure stable data transmission. -
Page 11: Jcmos1: Cmos Discharge
Any problem, please feel free to contact us. JCMOS1: CMOS Discharge Important • Always turn off the computer and unplug the power cord from the power outlet before discharging. — 9 —... -
Page 12: Jcom1: Serial Port Connector
Any problem, please feel free to contact us. JCOM1: Serial Port Connector The COM connector can provide one serial port via an optional COM port cable. ATXPWR1, JATXPWR1: Power Connectors With the use of the power connector, the power supply can provide enough stable power to all the components on the motherboard. -
Page 13: Cpu_Fan1, Sys_Fan1: Fan Connectors
Any problem, please feel free to contact us. CPU_FAN1, SYS_FAN1: Fan Connectors CPU_FAN is a interface for CPU radiator. The 4pin fan has PWM intelligent speed regulation function, which can intelligently control the fan speed based on load and temperature changes. -
Page 14: Bios Setup
Any problem, please feel free to contact us. BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. BIOS identifies, configures, tests and connects computer hardware to the OS immediately after a computer is turned on. Its major functions include conducting the Power-On Self-Test (POST) during system startup, saving system parameters and loading the operating system, etc. -
Page 15: Enter Bios Setup
Any problem, please feel free to contact us. Enter BIOS Setup Entering BIOS Setup When the computer starts up, BIOS enters the self-test process. When the self-test is completed, the following message is displayed: Press DEL key to enter Setup Menu. At this time, Press <Delete>... - Page 16 Any problem, please feel free to contact us. When you need to restore the default BIOS settings to resolve certain issues, there are several ways to reset the BIOS: ∙ Go to BIOS and press F6 to load optimized defaults. ∙...
Need help?
Do you have a question about the BTC-B250C and is the answer not in the manual?
Questions and answers