Changing The Route Guidance Screen Settings - Sanyo NV-E7000 Installation And Operation Manual

CHANGING THE ROUTE GUIDANCE SCREEN SETTINGS (1)

1
Press the É button.
2
Select from the
Route Guidance
drop-down menu and
press the Ä button.
3
Change the route guidance
settings.
SETTING AUTO REROUTE
Route Guidance
Setting Auto Reroute in Route Guidance
of the menu will enable the unit to
re-effectuate a reference route search
automatically from your present location
to the destination in the event you stray
off the set route while route guidance is
in progress.
q Select
.
Auto Reroute
d
Pressing down on the Joystick ( ) will display
the continuation. Press the and button
to go to the next/previous page.
w Press the Ä button to
place a mark.
... Indicates that this condition is set.
To change, press the Ä
button again to delete the
mark.
Example of setting auto reroute.
Hint
¡If a waypoint(s) is set, the unit
will search for a route passing
through it (them). (Excluding
already passed waypoints.)
¡To disable auto reroute, press
the ENTER button as
w 3
described in of step
and remove the mark.
118
N
A
V
I