Setting The 2-Screen Display - Sanyo NV-E7000 Installation And Operation Manual

SETTING THE 2-SCREEN DISPLAY (1)

SETTING THE 2-SCREEN
DISPLAY
When displaying the present location,
you can split the screen in two and
show on the right side of the display
maps with varying reduction scale
levels, intersection enlargement
illustrations, route information and
other information screens.
Example of an intersection enlargement
illustration.
Left screen Right screen
(information screen)
1
When displaying the present
location, press the
é button.
< To return to full screen display,
press é again.
Hint
¡It may take a moment before
the 2-screen display is
produced.
¡The route information and the
intersection enlargement
illustration are displayed only
during route guidance.
¡The left screen can have its
map display settings and
reduction scale changed in the
same manner as when in full
screen display.
¡You cannot switch between 2-
screen display and full screen
display during a route
simulation.
115

SETTING THE 2-SCREEN DISPLAY

CONTENT Map Display
The type of right screen (information
screen) for the 2-screen display can be
selected.
Map
Route
information
Exit 1km
Intersection
enlargement
illustration
1
Press the É button.
2
Select Map Display from the
drop-down menu and
press the Ä button.
3
Select and press
Right Display
the Ä button.
4
Select the right screen map
display method.
SELECTING THE
REDUCTION SCALE
q Select
In or Out with the
Joystick.
w Press the Ä button.
Every time the Ä button is
pressed, the reduction scale changes.
SELECT THE MAP
DISPLAY METHOD
Select the display method (North Up/
Heading Up) and press the Ä
button.
Settings indicated with a mark are
effectuated.
Example of selecting "Heading Up".
DISPLAY THE ROUTE
INFORMATION
When route guidance is in progress
after a route search, the road names
and distance remaining to the
destination, etc. are displayed. Select
Route Information Display and press the
Ä button.
A mark is indicated.
: Indicating a mark for
will
Route Information Display
automatically erase the mark for
. If wanting to display the
Map Display
map, select , press the
Map Display
Ä button to indicate a
mark.
DISPLAY INTERSECTION
ENLARGEMENTS
Crossing Enlargement Display
During route guidance and route
simulation,
¡when approaching major
intersections, an enlargement
illustration is displayed with the
name of the intersection as well as
an arrow mark showing which
direction to turn.
¡When highway junctions and ramps
are approaching, the display shows
an illustration guide (junction view)
indicating the direction as well as a
t mark (lit) showing you the way to
zSee p.28, "Junction guide".
turn.
116
N
A
V
I