Customizing Your Navigation System; Modifying The Default Settings; Items Users Can Change; Volume - Pioneer AVIC-N3 Operation Manual

Customizing Your Navigation System

• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the parking
brake before setting your route (see page
13 Interlock for details).

Modifying the Default Settings

You can tailor default settings, such as naviga-
tion functions and information display, for ease of
use.
The following example describes how to change
settings. In this example, the "KM/Mile Setting"
settings is set to "Mile & Yard".
1
Touch "Settings" in the Main menu.
The Settings menu appears.
2
Touch "System Options".
The screen changes. "Mile" is displayed
below "KM/Mile Setting", indicating that
this function is currently set to "Mile".
❒ When you touch items with a setting below
them, their setting changes. When you
touch items with no setting below them, a
setting screen appears.
❒ Touching "Back" switch to Settings
Menu.
3
Touch "KM/Mile Setting".
"Mile & Yard" is displayed below "KM/Mile
Setting", indicating that "KM/Mile Setting"
is set to "Mile & Yard".
If you want to change another setting, select
the item you want to change and repeat the
procedure in step 3.

Items Users can Change

This section describes the details of the setting
for each item. Settings marked with an asterisk
(*) show that they are default or factory settings.

Volume

The sound volume for the navigation can be set.
You can separately set the volume of the route
guidance and the beep sound.
To display the Volume setting screen, touch
"Volume" in the Settings menu.
❒ You can also display the Volume setting
screen by pressing and holding the REAR/
GUIDE button.
❒ When you move to the Volume setting screen
by touching "Volume" in the Settings menu,
touching "Back" returns you to the Settings
menu screen. When you move to the Volume
setting screen by pressing and holding the
REAR/GUIDE button, touching "Back"
returns you to the navigation map screen.
Chapter 5
67