Initial Settings; Adjusting Initial Settings; Switching The Auxiliary Setting - Pioneer AVIC-N3 Operation Manual

1
Touch "SETUP" and "PARENTAL".
2
Touch "PARENTAL".
3
Touch 0 — 9 to input a four digit code
number.
4
While the input number is displayed,
touch "ENTER".
The code number is registered, and you can
now set the level.
5
Touch any of 1 — 8 to select the desired
level.
The parental lock level is set.
• LEVEL 8 — Playback of the entire disc is
possible (initial setting)
• LEVEL 7 — LEVEL 2 — Playback of discs
for children and non-adult oriented discs is
possible
• LEVEL 1 — Playback of discs for children
only is possible
❒ If you want to change the parental level,
enter the registered code number in the
Step 2.
❒ We recommend to keep a record of your
code number in case you forget it.
❒ The parental lock level is recorded on the
disc. You can confirm it by looking at the
disc package, included literature or on the
disc itself. With discs that do not feature a
recorded parental lock level, you cannot
use parental lock.
❒ With some discs, parental lock operates to
skip certain scenes only, after which nor-
mal playback resumes. For details, refer to
the disc's instructions.
❒ If you forget the registered code number,
touch "CLEAR" 10 times on the screen in
the Step 2. The registered code number is
canceled, letting you register a new one.
112

Initial Settings

Adjusting initial settings

(1)
Initial settings lets you perform initial set up of
different settings for navigation system.
(1) Function display
Shows the function names.
1
Touch the source icon and then touch
"SOURCE OFF" to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Touch "A.MENU" and then touch
"INITIAL" to display the function names.
The function names are displayed and opera-
ble ones are selected.
When "A.MENU" is not displayed, you can
display it by touching the screen.
To return to the previous display, touch
"BACK".
To return to the display of each source, touch
"ESC".

Switching the auxiliary setting

It is possible to use auxiliary equipment with navi-
gation system as the one of source. Activate the
auxiliary setting when using auxiliary equipment
connected to the navigation system.
1
Touch "AUX" in the INITIAL menu.
Touching "AUX" switches between "ON" and
"OFF".
➲ Selecting AUX as the source ➞ Page 106