Setting The Rear Output And Subwoofer Controller; Switching The Sound Muting/Attenuation; Switching The Automatic Disc Playback - Pioneer AVIC-N3 Operation Manual

Setting the rear output and sub-
woofer controller
The navigation system's rear output (rear speaker
leads output and RCA rear output) can be used
for full-range speaker (REAR SP FULL) or sub-
woofer (REAR SP SUB W) connection. If you
switch the rear output setting to the REAR SP
SUB W, you can connect a rear speaker lead
directly to a subwoofer without using an auxiliary
amp.
Initially, the navigation system is set for rear full-
range speaker connection (REAR SP FULL).
When rear output is connected to full range
speakers (when REAR SP FULL is selected),
you can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller's (low pass filter,
phase) built-in PREOUT SUB W or the auxiliary
PREOUT FULL.
1
Touch "REAR SP" in the INITIAL menu.
2
Touch "REAR SP" to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select FULL.
When a subwoofer is connected to the rear
output, select SUB W.
❒ When the rear output setting is SUB W,
you cannot change the subwoofer control-
ler.
3
Touch "PREOUT" to switch the sub-
woofer output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn "NON FADING" or
"SUB WOOFER" in the AUDIO menu
"ON".
➲ Using non fading output ➞ Page 109
➲ Using subwoofer output ➞ Page 109
❒ If you change the subwoofer controller
(REAR SP), the subwoofer output (SUB
WOOFER) and non fading output (NON
FADING) in the AUDIO menu return to
the factory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar phone connected to navigation system.
• When the voice guidance is output.
1
Touch "TEL/GUIDE" in the INITIAL
menu.
Each touch of the "TEL/GUIDE" changes the
settings as follows:
• MUTE— Muting
• ATT — Attenuation
• NORMAL — Volume does not change
❒ The sound is turned off, "MUTE" is dis-
played and no audio adjustments are pos-
sible.
❒ The sound is attenuated, "ATT" is dis-
played and no audio adjustments, except
volume control, are possible.
❒ Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the VOLUME/ATT
button to control the navigation voice guid-
ance volume.
Switching the automatic disc
playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading slot.
When this function is on, the disc will be auto-
matically played after it is inserted into the disc
loading slot.
Initially, this function is set to OFF.
1
Touch "DISC AUTO" in the INITIAL
menu.
Touching "DISC AUTO" switches between
"ON" and "OFF".
113