Escea DS Series Installation & Service Instructions Manual page 49

Frameless
If not using a fascia, ensure the edge of the wall lining is finished in a tidy manner (for a nice Gib finish
we recommend Gib Rondo stopping bead).
Note: a 20mm or less wall lining must be used when installing a DS Series fireplace without a fascia.
For wall linings of a total thickness of 10mm or larger, a "Linear Trim" may be purchased to cover any
exposed wall lining. A 10mm wall lining is recommended for ease of installation.
Bevelled Lite Fascia
If using a (Bevelled Lite) fascia, cutouts will be required in the finished plaster board to allow for the
fascia securing pins to attach to the appliance.
Note: that a 13mm wall lining must be used when installing a DS fireplace with a Bevelled Lite fascia,
as this is the maximum distance the Bevelled Lite fascia can sit off the front face of the fire as shown.
For wall linings of a total thickness of 10mm or larger, a "Linear Trim for Bevelled Lite" may be pur-
chased to cover any exposed wall lining.
Linear Trim
For 10mm-20mm wall linings, an optional "Linear Trim" can be used to cover any unwanted exposed
wall lining and/or act as a slimline fascia.
49