Hitachi CP-SX12000 User Manual page 43

Item
START UP
(continued on next page)
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó OFF
MyScreen
ORIGINAL
OFF
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (26) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (62), the START UP is fixed to MyScreen.
Description
Feature
Screen can be registered by the MyScreen item
(44)
.
Screen preset as the standard screen.
Plain black screen.
SCREEN menu
43