1. Introduction This digital trail camera is a surveillance camera working automatically. It can be triggered at once by any movement of human (or animals) in a certain region of interested (ROI) monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 12M pixels) or records 1080p HD video clips.
1.4 Key Features 30pcs IR LEDs for flash range as 20 meters 12MP/8MP/5MP resolution optional Color pictures during daylight; black and white at night Trigger time:1.1s Multi-shot pictures; 1,3,6,9 1/5/10/30 seconds/minutes Interval between motions optional video length: 10/30/60/90 seconds optional With 4 AA alkaline batteries, the longest standby time is up to 6 months operation temperature: -10℃...
3. Operation 3.1 Load Batteries 3.2 Insert Micro SD Card (8MB~32GB) 3.4 Power on Slide Power Switch from OFF to Test (the indicator light will flash twice once the micro SD card was detected, and flash 1 time if no micro SD card in it) then turn to ON position, the camera powers on.
Page 8
Image Sensor 5 Mega Pixels Color CMOS Memory TF Card to 32GB Lens F=3.1; FOV=90 ° Size 129mmx93mmx39mm Black IR Motion Detection High/Normal/Low PIR Sensor Sight Angle 90 Degrees Number of IR LED 30LEDs Max Night Vision Lighting 65ft/20 meters Distance Trigger Speed 1.1 second...
Need help?
Do you have a question about the WCT-5001 and is the answer not in the manual?
Questions and answers