General Specifications - Fluke 15B+ Calibration Manual

General Specifications

Maximum voltage between any Terminal and Earth Ground: 1000 V
Display (LCD) ........................................................ 4000 counts, updates 3/sec
Battery Type .......................................................... 2 AA, IEC LR6
Battery Life ............................................................ 500 hours minimum (50 hours in LED Test mode without load. The
Temperature
Operating ............................................................ 0 °C to 40 °C
Storage ............................................................... -30 °C to 60 °C
Relative Humidity
Operating Humidity ............................................. Non-condensing (<10 °C); ≤90 % RH from 10 °C to 30 °C; ≤75 % RH
Operating Humidity, 40 MΩ Range ..................... ≤80 % RH at 10 °C to 30 °C; ≤70 % RH at 30 °C to 40 °C
Altitude
Operating ............................................................ 2000 m
Storage ............................................................... 12 000 m
Temperature Coefficient ....................................... 0.1 X (specified accuracy) / °C (<18 °C or >28 °C)
Fuse protection for current inputs ...................... 440 mA, 1000 V, IR 10 kA min
Size (HxWxL) ......................................................... 183 mm x 91 mm x 49.5 mm
Weight .................................................................... 455 g
Ingress Protection ................................................ IEC 60529: IP40 non-operating
Safety ..................................................................... IEC 61010-1: Pollution degree 2
Electromagnetic Compatibility
International ........................................................ IEC 61326-1: Basic Electromagnetic Environment: IEC 61326-2-2
Korea (KCC) ...................................................... Class A Equipment (Industrial Broadcasting & Communication
USA (FCC) .......................................................... 47 CFR 15 subpart B. This product is considered an exempt device per
1.800.561.8187
hours with load depends on the type of LED under test.)
at 30 °C to 40 °C
11 A, 1000 V, IR 20 kA min
IEC 61010-2-033: CAT III 600 V, CAT II 1000 V
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or use
conductively coupled radio-frequency energy which is necessary
for the internal functioning of the equipment itself.
Class A: Equipment is suitable for use in all establishments other
than domestic and those directly connected to a low voltage power
supply network which supplies buildings used for domestic
purposes. There may be potential difficulties in ensuring
electromagnetic compatibility in other environments, due to
conducted and radiated disturbances.
Equipment)
Class A: Equipment meets requirements for industrial
electromagnetic wave equipment and the seller or user should take
notice of it. This equipment is intended for use in business
environments and not to be used in homes.
clause 15.103.
www. .com
Digital Multimeter
General Specifications
information@itm.com
5