Related Manuals for Taurus Iso Chest Press Sterling
Summary of Contents for Taurus Iso Chest Press Sterling
- Page 1 Assembly and Operating Instructions max. 150 kg ~ 90 Min. 163 kg L 193 | W 137 | H 171 FSTFSL7001.01.01 Art. No. TF-SL7001 Taurus Iso Chest Press Sterling...
- Page 2 Chest Press...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing... - Page 4 Chest Press...
- Page 5 European VAT Number: DE813211547 Disclaimer © TAURUS is a registered brand of the company Fitshop GmbH. All rights reserved. Any use of this trademark without the explicit written permission of Fitshop is prohibited. Product and manual are subject to change. Technical data can be changed without advance notice.
- Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and fi rst use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
- Page 7 Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions. The following safety instructions may appear in this manual: ATTENTION This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.
-
Page 8: General Information
GENERAL INFORMATION Technical Data Weight and Dimensions Packaging dimensions (L x W x H) and article weight (gross, incl. packaging) approx.: Box 1: 164.5 cm x 86.5 cm x 27.5 cm 75 kg Box 2: 151.5 cm x 60.5 cm x 28 cm 66.3 kg Box 3: 93 cm x 75.5 cm x 39 cm... -
Page 9: Personal Safety
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly aff ected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 10: Set-Up Place
Set-Up Place ⚠ WARNING Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 11: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suff ocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. - Page 12 Content of Box 1 Name Qty. Left Arm Frame Right Arm Frame Pivot Shaft Ø30 Manual Hardware pack Pull Spring Seat Frame Idler Wheel Back Pad Seat Pad Manual Hardware Pack Chest Press...
- Page 13 Content of Box 2 Name Qty. Upright Frame Pivot Plate 1 Pivot Plate 2 Weight Horn Assembly...
- Page 14 Content of Box 3 Name Qty. Left Bottom Frame Right Bottom Frame Back Pad Frame Cross Frame Rear Cross Frame Weight Plate Storage Chest Press...
-
Page 15: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fi t properly. Tighten the screws using the tool only when you are instructed to do so. - Page 16 Step 1: Assembly of the Bottom Frames and the Cross Frame NOTICE Do not tighten the bolts and nuts completely yet. Attach the left bottom frame (1) to the cross frame (7) with two screws (46), four fl at washers (62) and two lock nuts (58).
- Page 17 Step 2: Assembly of the Upright Frames, Rear Cross Frame and Back Pad Frame NOTICE Do not tighten the bolts and nuts completely yet. Attach one upright frame (6) to the left bottom frame (1) with four screws (50) and four fl at washers (62).
- Page 18 Chest Press...
- Page 19 Step 3: Assembly of the Arm Frames NOTICE Do not tighten the bolts and nuts completely yet. Attach one pivot plate 1 (13) and one pivot plate 2 (14) to each upright frame (6) with three screws (44), six fl at washers (62) and three lock nuts (58) for each upright frame (6). Slide the left arm frame (4) between the pivot plates 1 and 2 (13 &...
- Page 20 Chest Press...
- Page 21 Step 4: Assembly of the Seat Frame and the Pads Attach the seat pad (30) to the seat pad frame (23) with two screws (53) and two fl at washers (61). Attach the seat frame (23) and two idler wheels (24) to the back pad frame (3) with two screws (45), four fl at washers (62) and two lock nuts (58).
- Page 22 Chest Press...
- Page 23 Step 5: Assembly of the Weight Plate Storages Attach a total of four weight plate storages (10) to the upright frames (6) with two screws (47), four fl at washers (62) and two lock nuts (58) each. Check that all screws and nuts are properly tightened and retighten if needed. →...
- Page 24 Load and Unload Weight Plates ATTENTION Make sure to always use some sort of weight collar when exercising with external weights. Store unused weight plates on a weight rack or on the integrated storage option. NOTICE Use weight plates with a 50 mm hole and an external diameter of not larger than 500 mm. Weight plates and weight collars are not included in the scope of delivery.
- Page 25 Exercise Instructions Select an appropriate weight. Adjust the seat to the desired position. Sit down on the seat with your back against the back pad. Grasp the handles with both hands. Push the handles straight out. Pause slightly at the end position. Slowly return to the starting position.
-
Page 26: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ATTENTION Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. -
Page 27: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. ⚠ CAUTION Damaged or worn components may aff ect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 28: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specifi ed intervals: Part Weekly Monthly Quarterly Screw connections Cushions... -
Page 29: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more effi cient and pleasant, we recommend that you add suiting accessories to your fi tness equipment. For training equipment like smith machines, weight benches or racks this could for example be a fl oor mat, which makes your fi tness equipment stand more securely and also protects the fl oor from sweat but it could be also additional weights, handles, foot straps for leg exercises or triceps ropes. -
Page 30: Ordering Spare Parts
The serial number of your equipment is unique. It's located on a white sticker. Enter the serial number in the appropriate fi eld. Serial number: Brand / Category: Taurus / multi gym Model Name: Iso Chest Press Sterling Article Number: TF-SL7001 Chest Press... -
Page 31: Parts List
Parts List Name Qty. Name Qty. Left Bottom Frame Weight Horn Rubber Donut Right Bottom Frame Aluminium Cap Φ25 Back Pad Frame Aluminium Ring Φ25 Left Arm Frame End Plug Right Arm Frame Rubber Grip Upright Frame Rubber Foot Cross Frame Oilite Bushing Rear Cross Frame Ball Bearing... - Page 32 Flat Washer Φ13*Φ24*1.5 Socket Head Cap Screw M8*30 Socket Set Screw 10-32*3.2 Hex Key S=10 Hex Key S=8 Hex KeyS=6 Hex Key S=4 Supporting Sleeve Baffl e Ring Flat Washer Φ9*Φ16*1.6 Split Washer Φ8 Chest Press...
-
Page 33: Exploded Drawing
Exploded Drawing... -
Page 34: Warranty
WARRANTY Products from TAURUS® are subject to strict quality control. However, if a fi tness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 35 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 36: Contact
CONTACT TECHNIK TEKNIK OG SERVICE CUSTOMER SUPPORT �� �� �� +49 4621 4210-900 80 90 16 50 00800 2020 2772 +494621 4210 944 +49 4621 4210-945 �� +49 4621 4210-698 �� �� info@fi tshop.dk info@fi tshop.co.uk �� technik@fi tshop.de �� ��... - Page 37 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Fitshop is Europe’s largest specialist store for www.fi tshop.co.uk home fi tness equipment with currently over 70 www.fi tshop.de/blog stores and one of the world’s most renowned online mail order companies for fi tness equipment.
- Page 38 Notes Chest Press...
- Page 40 Taurus Iso Chest Press Sterling...
Need help?
Do you have a question about the Iso Chest Press Sterling and is the answer not in the manual?
Questions and answers