Initial Setup - Furuno TZtouch3 TZT9F Installation Manual

3.3

Initial Setup

This section shows you how to set your system according to the sensors you have
connected.
Note: Some units are set to metric in this section, actual setting ranges vary
depending on the unit of measurement set in the [Units] menu.
1. Tap the [FURUNO] icon (
mode settings.
2. Tap [Settings] to show the [Settings] menu.
3. Scroll the main menu, then tap [Initial Setup] to show the [Initial Setup] menu.
4. Referring to the tables on the following pages, set your equipment.
[Initial Setup] menu - [GPS POSITION]
Menu item
[Longitudinal (from
bow]
[Lateral (-Port)]
Menu item
[Boat Length]
[Boat MMSI]
[Boat Name]
[Size of Static Icon]
[Depth Display]
[External Transducer
Draft]
[Keel Draft]
[Engine Count]
Menu item
[Engine & Tank Auto-
matic Setup]
[Engine & Tank Manual
Setup]
[Graphic Instruments
Setup]
Description
Referring to the figure on the right,
enter the GPS antenna positioning
bow-stern (Longitudinal) and port-
starboard (Lateral) position from
the origin.
[BOAT INFORMATION]
Description
Set the length of your boat.
Set the MMSI for your boat (used for fleet tracking function only).
Set the name for your boat (used for fleet tracking function only).
Set the size of static (such as own ship) icons.
Select the start point for depth measurement.
Set the draft of external transducer. See the in-
structions below for how to set the draft of other
types of transducers.
For internal/network transducers, set the draft
from Home screen → [Settings] → [Sounder] →
[Transducer Draft].
For multi-beam sonars, set the draft from Home
screen → [Settings] → [Multibeam Sonar] →
[Initial Setup] → [External Transducer Draft].
Set the keel draft.
Set the number of engines.
Engine & Tank, Instruments Setup
Description
See "[Initial Setup] menu - [Engine & Tank Automatic Setup]" on page 3-
12.
See "[Initial Setup] menu - [Engine & Tank Automatic Setup]" on page 3-
12.
See "[Initial Setup] menu - [GRAPHIC INSTRUMENTS
SETUP]" on page 3-11.
3. HOW TO SET UP THE EQUIPMENT
) to show the home screen and display
Options (setting range)
0 (m) to 999 (m)
-99 (m) to +99 (m)
Origin Origin
Port-side is negative,
Starboard-side is positive.
Options (setting range)
0 (m) to 999 (m)
50 to 150
[Under Keel],
[Under Sea Level]
0.0 (m) to 99.9 (m)
0.0 (m) to 99.9 (m
0 to 6
Options (setting range)
3-7