BLACKSTONE 1866 - 36" GRIDDLE Manual

SAFETY ALERT KEY

Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related (e.g. messages related to property damage).

ASSEMBLY GUIDE

EXPLODED VIEW

PARTS LIST

ASSEMBLY INSTRUCTIONS

Find a large, clean area to assemble your appliance.
Remove all packing material before assembling.

Sharp edges. Wear gloves while assembling.

Heavy pieces. Two people should assemble this appliance.

NOT INCLUDED:
LPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
LPG cylinder must include collar to protect LPG cylinder valve.

AA battery

TOOLS NEEDED:
Phillips head screwdriver & Adjustable wrench

1. With the help of another person, remove the griddle body from the packaging and lay it on its back on a smooth, flat surface. Unfold the legs.
   
   1. Use two (2) small thumbscrews to install the fixed wheels to the right leg assembly.
   2. Be sure that the casters are locked and install them to the left leg assembly.
2. Place the bottom shelf between the legs.
   
   1. Use one (1) large thumbscrew to attach the bottom shelf to the right leg assembly.
   2. Use one (1) medium thumbscrew to attach the propane tank support to the left leg assembly and secure the bottom shelf.
3. With the help of another person, set the griddle body on its feet.
   Use one (1) M6x70 bolt and one (1) M6 nut to attach the LPG hook to the left leg assembly.
   
4. Install the four (4) control knobs by pushing them into place in the OFF position.
   
5. Use one (1) M6x12 screw and (2) washers to install the paper towel holder onto the paper towel bracket peg.
   
6. Use four (4) M6x12 screws to attach one (1) side shelf bracket (L) and one (1) side shelf bracket (R) to the right side of the griddle.
   
7. Use four (4) M6x12 screws to attach one (1) side shelf bracket (L) and one (1) side shelf bracket (R) to the left side of the griddle.
   
8. Use four (4) M6x12 screws to install the handle to the left side of the griddle.
   
9. Hang the grease cup in the slot on the back of the griddle body.
   
10. Thread the four (4) side shelf pegs and four (4) peg washers into the precut holes on the right side shelf.
    Repeat this step with the left side shelf.
    
11. Hook the right side shelf's pre-installed M8 step bolts onto the shelf brackets on the right side of the griddle.
    Secure the shelf with two (2) M8 step bolts in the bottom holes of the shelf brackets.
    Repeat this step with the left side shelf.
    
12. Use the four (4) M4x10 screws inside the handles to attach two (2) hard cover handles and two (2) hooks to the hard cover.
    
13. With the help of another person, align the griddle top leg pins with the corresponding holes of the griddle body and set in place. Be sure that all pins are inserted. (Hang hard cover on back of griddle top when in use, and place hard cover on the griddle top when not in use.)
    
14. Proceed to USING YOUR BLACKSTONE.
    

Handle will get hot while appliance is in use.
DO NOT touch the handle while appliance is hot.
NOTICE

• Maximum weight on the side shelf is 10 lbs (4.5 kg).
• The side shelf may get hot while appliance is in use.

USING YOUR BLACKSTONE

THE LPG CYLINDER VALVE MUST HAVE:

• Type 1 valve outlet (thread on the outside).
• Safety relief valve.
• UL listed overfill Protection device (OPD). This OPD safety feature is identified by a unique triangular hand wheel.
• Safety cap (dust cap).

REGULATOR SAFETY

Cross threading can occur if you force thread a connection at an improper angle. This will damage the threads, lead to propane leaking, and potentially result in a build-up of fuel that can ignite.
DO NOT cross thread the connection between your LPG cylinder and regulator.

If you can not connect the regulator, DO NOT use the regulator.
Regulator must be replaced with a Blackstone approved model by a professionally licensed, authorized dealer.
Use this appliance, as purchased, only with gas and regulator/valve assembly supplied.

FITTINGS & HOSES

• Annual checking and tightening of metal fittings is recommended.
• Keep the fuel supply hose away from any heated surfaces.
• Before each use, check to see if hoses are cut or worn.

Replace damaged hose before using appliance. (Use only Blackstone approved replacement parts for valve, hose, or regulator Failure to comply will void the warranty.)

CONNECT THE LPG CYLINDER

1. Turn the control knobs to OFF.
   
   1. Ensure that the LPG cylinder is OFF by turning the OPD hand wheel clockwise to a full stop.
   2. Remove the safety cap from the Type 1 valve outlet.

The LPG cylinder supply system must be arranged for vapor withdrawal.
Always keep new LPG cylinders in upright position during use, transit or storage.

2. Hold the regulator in a straight line with the Type 1 valve outlet so as not to cross thread the connection.
   Center and insert the regulator nipple into the Type 1 valve outlet.
   Hand-tighten the coupling nut in a clockwise direction.
   (DO NOT use tools to connect.)
   If connection cannot be completed, disconnect regulator and repeat this step.
   
3. Secure the LPG cylinder to the appliance by hanging it on the LPG hook so that it nestles against the LPG support.
   

LEAK TEST INSTRUCTIONS

NOTICE
DO NOT use household cleaning agents. Damage to gas valve, hose, and regulator components may result.
Use a clean paintbrush and a 10/90 mild soap and water solution to perform the leak test.

LEAK TEST: LPG CYLINDER

• Leak test new and exchanged LPG cylinders BEFORE connecting to griddle.
• DO NOT smoke during leak test.
• DO NOT use an open flame to check for gas leaks.
• Appliance must be leak tested outdoors in a well-ventilated area, away from ignition sources such as gas fired or electrical appliances.
• During leak test, keep appliance away from open flames or sparks.

1. Brush soapy solution onto joint areas of the LPG cylinder.
   (Indicated by arrows in figure 01)
   
2. Leaks are indicated by growing bubbles.

If growing bubbles appear during leak test, DO NOT use or move the LPG cylinder.
Immediately contact an LPG supplier or fire department.

LEAK TEST: VALVES, HOSE & REGULATOR

1. Turn the control knobs to OFF.
2. Connect the regulator to the LPG cylinder.
3. Completely open the LPG tank by turning the OPD hand wheel counterclockwise.
   • If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection.
   • Immediately close the LPG cylinder by turning the OPD hand wheel clockwise and re-tighten connections. If leaks cannot be stopped DO NOT TRY TO REPAIR.
4. Brush soapy solution onto joint areas of valves and regulator.
   (Indicated by arrows in figure 02.)
   
   • Leaks are indicated by growing bubbles.
   • Immediately close the LPG cylinder by turning the OPD hand wheel clockwise and re-tighten connections.

If leaks cannot be stopped, DO NOT try to repair.
Regulator must be replaced with a Blackstone approved model by a professionally licensed, authorized dealer.

FIRST TIME CLEANING

NOTICE
Soap will ruin a seasoned griddle. This is the only time you should use soap on the griddle cooking surface.

1. Wash the griddle cooking surface with hot, soapy water.
2. Rinse and dry completely.

IGNITION INSTRUCTIONS

CHECK VALVES

1. Turn knobs to OFF position.
2. Push in knobs and release. Knobs should spring back.
   If knobs DO NOT spring back, replace valve assembly before using appliance.
3. Rotate knobs to LOW then turn back to OFF. Knobs should turn smoothly.

If burner does not ignite with open LPG cylinder valve, gas will continue to flow out of burner and could accidentally/ inadvertently ignite with risk of injury.
Ensure gas is o at the supply shut o valve before checking appliance valves.

BATTERY POWERED IGNITION

DO NOT lean over the appliance while lighting.

1. Insert one (1) AA battery (not included) under the ignitor button.
   Screw the button into place over the positive terminal.
   
2. 1. Turn the control knob to OFF.
3. Turn gas oN at the LPG cylinder by turning the OPD hand wheel counterclockwise 1 to 3 turns.
   
4. 2. Push and hold the ignitor button.
   3. Push and turn the control knob counter-clockwise to HIGH.
      (Release the ignitor button when the burner lights.)
   4. Adjust the temperature to desired level.

CHECK BURNER FLAME

Always check burner flame before use.

1. Light burners and rotate knobs from HIGH to LOW.
2. Look below the cooking top to view burners. When knob is at HIGH, flames should be larger than when knob is at LOW.

A clogged burner tube can lead to a fire beneath the appliance.
Burner should be removed and cleaned annually or whenever heavy build-up or insects/insect nests are found.

HEALTHY BURNER FLAME PATTERN

1. Flickers of yellow color.
2. Dark blue color.
3. Vibrant blue.

BURNER FLAMES ARE YELLOW OR IRREGULAR

If there is a sudden drop or low flame issue, please reference the Troubleshooting chapter.

GRIDDLE SEASONING INSTRUCTIONS

WHAT OIL IS BEST TO USE?

• Blackstone Seasoning and Cast Iron Conditioner.
  
• Any plant-based cooking oil.
• Rendered animal fat with no additives.

VIDEO TUTORIAL
How to Season a New Blackstone Griddle
youtube.com/watch?v=VspmdVnj2pI&t=3s

1. Wipe any debris off griddle top.
   
2. Set your griddle to high heat until your griddle top changes color. (~10 min)
   
3. Use tongs to hold a paper towel or cotton cloth and spread 2-3 tablespoons of your seasoning oil across the entire griddle top.
   When seasoning your griddle top, remember to use a thin and even layer of oil — the thinner the layer of oil, the easier it will be to burn it off.
   
4. The griddle top is ready for another layer of oil when it stops smoking. Repeat STEP 03 3-4 times, or until the griddle surface is black.
   

SEASONING TROUBLESHOOTING

THERE IS A BROWNISH RESIDUE ON THE GRIDDLE SURFACE:

THE EDGES OF THE GRIDDLE SURFACE ARE NOT BLACK:
After using your griddle for multiple cooks, the seasoning will even out and improve.

PREVENTING RUST

Use your griddle frequently. every time you cook, you are adding to the seasoning, which makes rust less likely.
NOTICE
If you live in a humid or coastal climate, your griddle may require more frequent seasonings between uses.
If rust appears on the griddle surface, rub it off with steel wool, low grit sandpaper or the Blackstone Pumice Stone and re-season the surface.

VIDEO TUTORIAL
Recovering your Blackstone Griddle Top
youtube.com/watch?v=thPe2IgnSiI

COOKING ON YOUR BLACKSTONE

Flammable items can spontaneously combust if placed near the appliance. DO NOT place flammable items such as aerosol containers, oily or greasy towels near the cooking surface.

This appliance will be hot during and after use. DO NOT handle hot parts with unprotected hands. Use long-handled cooking utensils and oven mitts.
NOTICE
DO NOT store any items within 3 in (8 cm) of the cooking surface while in use.

IF GREASE OR OTHER HOT MATERIAL DRIPS ONTO VALVE, HOSE OR REGULATOR:

1. Turn off gas supply immediately.
2. determine the cause and correct it.
3. Clean and inspect valve, hose and regulator.
4. Perform a leak test. (Please reference the leak Test Instructions in USING YOUR BLACKSTONE.)

VIDEO RECIPES
Find recipes and cooking tips at:
blackstoneproducts.com/blogs/recipes
youtube.com/c/BlackstoneGriddles

@blackstoneproducts

CLEANING YOUR APPLIANCE

Clean your appliance after each use, after it is cool to the touch.

• DO NOT use abrasive pad on areas with graphics.
• If a bristle brush is used to clean any of the cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to cooking.

Grease build up can cause a fire. Clean any part of the Maximum weight on the side shelf is 10 lbs (4.5 kg). appliance that gets hot and experiences grease build up after each use.

PLASTIC PARTS & PAINTED SURFACES:
Wash with warm soapy water and wipe dry with a non-abrasive cloth.
NOTICE
DO NOT use Citrisol, abrasive cleaners, or a concentrated cleaner on plastic parts. This may result in damage to and failure of parts.

FOR EVERY SURFACE
The Blackstone degreaser and Cleaning Spray is gentle enough to clean every surface of your appliance. Use it on the cooking surface, the appliance frame, or anywhere that experiences a build up of grease.

APPLIANCE STORAGE

DO NOT move the appliance when in use. Allow the appliance to cool to 115°F (45°C) before moving or storing.
When not in use, turn OFF appliance by rotating the appliance control knobs to the OFF position and closing the fuel valve.
When gas supply is connected to appliance, store appliance outdoors in a cool, dry, well-ventilated space and out of reach of children.

COVER FIT GUIDE
Always cover your appliance if stored outdoors.
Visit blackstoneproducts.com/support to find a cover that will fit your appliance.

CLEANING YOUR GRIDDLE TOP

Clean griddle top after each use, while still warm.

• DO NOT use soap on the griddle top. This will destroy the griddle's seasoning.
• The grease cup must be removed and emptied after each use.

Grease cup will be hot during and after use. DO NOT remove the grease cup until the griddle has completely cooled.

VIDEO TUTORIAL
How to Clean your Blackstone Griddle
youtube.com/watch?v=-Iedu9z6NPY

1. Push loose food debris into the grease cup with spatula or straight metal scraper.
   
2. Wipe down griddle top with paper towel.
   
3. Apply a few tablespoons of water to the griddle surface, then scrape the water and debris into the grease cup.
   (For stuck-on food residue, use a bit of coarse salt.)
   
4. Wipe again with a paper towel and dry completely.
   
5. Apply thin coat of cooking oil to maintain seasoning and protect the griddle top.
   

DISCONNECT THE LPG CYLINDER

1. Ensure that the control knobs are turned to OFF.
   
   1. Ensure that the LPG cylinder is OFF by turning the OPD hand wheel clockwise to a full stop.
   2. Turn the coupling nut counter-clockwise by hand to remove the regulator. (DO NOT use tools to disconnect.)
2. Place safety cap on LPG cylinder valve outlet whenever cylinder is not in use.
   Only install the type of safety cap on cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
   

STORING LPG CYLINDERS

DO NOT store a spare LPG cylinder under or near this appliance.
DO NOT fill an LPG cylinder beyond 80% full.
If the information above is not followed exactly, a fire causing death or serious injury may occur.
LPG cylinders must be stored outdoors and out of the reach of children.
DO NOT store an LPG cylinder inside a building, garage, or any other enclosed area.

FILLING & EXCHANGE

• Use only those reputable exchange companies that inspect, precision fill, test and certify their cylinders. LPG dealer must purge new cylinder before filling.
• Volume of propane in cylinder will vary by temperature.

A frosty regulator indicates gas overfill.
Immediately close LPG cylinder valve and call local LPG dealer for assistance.
DO NOT release liquid petroleum gas (LPG) into the atmosphere.

• To remove gas from LPG cylinder, contact a certified LPG dealer or local fire department for assistance.
• Exchange tank only for an OPD safety feature-equipped tank.

Your retailer can help you match a replacement LPG cylinder to your appliance.

TROUBLESHOOTING

IGNITION TROUBLESHOOTING

BURNER WILL NOT IGNITE

If ignition does not occur in 5 seconds:

1. Turn the burner controls OFF.
2. Wait 5 minutes.
3. Repeat the lighting procedure.
   If this does not work, to determine the cause, please try to ignite your appliance with a match.

MATCH LIGHTING INSTRUCTIONS
Before beginning, check for gas leaks. (Please reference the leak Test Instructions in USING YOUR BLACKSTONE.)

1. Turn control knob(s) to OFF position.
2. Remove cooking top.
3. Light a match (or long lighter) no shorter than 11 inches long. Place the flame on the right or left side of the burner.
4. Push in and turn the control knob to the HIGH position. Ensure burner lights and stays lit.

IF YOU CAN IGNITE YOUR APPLIANCE WITH A MATCH:

POSSIBLE CAUSES	SOLUTION
Dead/improperly installed battery.	Replace with new battery.
Ignitor wire misaligned.	Ensure that the ignition needle is positioned 3-7mm away from the burner tube, and above a burner hole.
Damage to the ignition system.	Contact customer service for replacement parts.

IF YOU CAN NOT IGNITE YOUR APPLIANCE WITH A MATCH:

GAS FLOW TROUBLESHOOTING

A FLAME IS COMING OUT OF THE AIR GATE

BURNER FLAMES ARE YELLOW OR IRREGULAR

• Appliance will not achieve a high heat or heats unevenly.
• Burner flames start strong, then immediately drop to low even when burner is set to high position.
• Flame height drops when a second burner is lit.
• Flames DO NOT extend the full length of the burner, or only run on one side of the burner.
• Burner flames are inconsistent.

CLEANING THE BURNER ASSEMBLY

VIDEO TUTORIAL
How to Clean Your Burner Tube
youtube.com/watch?v=xKQTCrFCzf8

1. Ensure that the gas is turned OFF at control knobs and gas supply. Remove the cooking top.
2. Carefully detach and remove the burner.
   
3. Clean the inside of the burner:
   
   • Run a narrow bottle brush through each burner tube several times. (do NoT use wire brushes)
   • Run a stiff wire bent into a small hook through each burner tube several times.
   • Use an air hose to force air into burner tube and out burner ports. Check that air blows through each hole. (Wear eye protection)
4. Brush entire outer surface of burner to remove grime.
   
5. Clean any blocked ports with stiff wire such as an open paper clip.
   
6. Carefully replace burners and reattach. The gas rail fuel nozzle must be reengaged within the burner opening.
   
   The gas rail fuel nozzle must be reengaged within the burner opening.

IMPORTANT SAFETY INFORMATION

If you smell gas:

• Shut off gas to the appliance.
• extinguish any open flame.
• If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

• DO NOT store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
• An LPG cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

This appliance shall be used outdoors only.

• CARBON-MONOXIDE HAZARD - USING THIS APPLIANCE IN AN ENCLOSED SPACE MAY CAUSE DEATH.
• ONLY USE IN WELL - VENTILATED AREAS.
• DO NOT use this appliance inside buildings, garages, caravans, tents, marine craft, cars, mobile homes or similar locations.

GAS APPLIANCE SAFETY

DO NOT OPERATE THIS APPLIANCE UNATTENDED.

• The use of alcohol, prescription, or non-prescription drugs may impair the consumer's ability to properly assemble or safely operate the appliance.
• Keep children and pets away from the appliance at all times.

HAVE A TYPE BC OR ABC FIRE ExTINGUISHER READILY AVAILABLE.

• In the event of an oil or grease fire DO NOT attempt to extinguish with water. Immediately call the fire department. A Type BC or ABC fire extinguisher may, in some circumstances contain the fire.

DO NOT USE FOR PURPOSES OTHER THAN INTENDED:

• DO NOT modify this appliance.
• DO NOT use for commercial cooking.
• DO NOT use this appliance as a heater.
• DO NOT install this appliance in or on a boat.
• DO NOT attempt to attach this appliance to the self-contained lPG system of a camper trailer, recreational vehicle or motor home.

MAINTAIN PROPER CLEARANCES FROM COMBUSTIBLE MATERIAL:

• DO NOT use this appliance on or under any apartment or condominium balcony or deck.
• DO NOT operate this appliance any closer than 36 in (1 m) from the sides and back of the appliance.
  
• DO NOT use this appliance under overhead combustible construction.

CUSTOMER SERVICE

Visit us online at blackstoneproducts.com/support for assistance concerning appliance use, replacement parts, or your warranty.

CUSTOMER SERVICE HOURS:
Monday – Friday
7:00 am – 5:00 pm (MST)