Related Manuals for x-sense Link+ Pro XH02-M
Summary of Contents for x-sense Link+ Pro XH02-M
- Page 1 Link Pro Heat Alarm XH02-M X-Sense Innovations Co., Ltd. Email: support@x-sense.com F.1.05.XH0208 V1.0 www.x-sense.com...
- Page 2 Thank you for purchasing this heat alarm. This user manual contains important information on installing and operating this heat alarm. Please read this user manual before installation or operation, and save it for future reference. Introduction This heat alarm uses an NTC thermistor to monitor temperature changes that may be caused by a re.
-
Page 3: Product Features
Product Profile Product Features Visual and Audible Alerts During an emergency, the unit will alarm at 85 dB within a distance of 10 ft (3 m), Buzzer and the LED will ash red in sync with the alarm tone. Battery Operated Test/Silence A long-life lithium battery sealed inside the alarm ensures a 10-year lifetime in Button... -
Page 4: Package Contents
To download the X-Sense Home Security App, scan the QR code or search for ATTENTION TO THESE SITUATIONS. “X-Sense Home Security” in the Apple App Store or Google Play Store. Sign up with a 2. THIS ALARM IS NOT INTENDED TO ALERT HEARING IMPAIRED INDIVIDUALS. THE USE valid email address. - Page 5 RF technology to create an interconnected alarm system. However, you will no longer be able to receive push noti cations on your phone from the X-Sense NOTE: When the device is configured via Wi-Fi, make sure your mobile phone and Home Security app.
- Page 6 4. If you want to connect a third alarm to this group, rst activate the new device NOTE: The following instructions regarding wireless interconnection are applicable to according to its operating instructions, and then quickly press the pairing button on X-Sense Link Pro and Link wireless interlinked alarms only.
-
Page 7: Alarm Test
In addition to the weekly tests you should perform, it is recommended to test the alarm after returning from a long trip or vacation. If your X-Sense alarm is interconnected to other X-Sense wireless alarms, we Hold down the test/silence button recommend that every individual alarm is tested during the weekly test. -
Page 8: Location And Placement
NOTES 1. The devices connected to the base station can only be tested individually. The interconnected devices that are not connected to the base station can be tested by holding down the test/silence button on one of the devices. 2. The test function accurately tests the alarm’s heat sensing circuit without the need to test with fire. - Page 9 Location in Your Home 5. If an alarm is installed onto a wall, a distance of 4-12 inches (10-30 cm) should be kept below the ceiling. To e ectively protect against re hazards, we recommend installing a complete re 6. If the length of a room or hall is beyond 30 feet (900 cm), several alarms should protection system: be installed in the same room.
-
Page 10: Locations To Avoid
Installation NOTE: If you install the alarm on a sloped ceiling, place it at least 4 inches (10 cm) from the peak. Keep the device at least 5 feet (1.5 m) from potential heat sources such as stoves, furnaces, water heaters, and space heaters. 1. - Page 11 LED Indicator and Audible Alarm The LED ashes green None. Alarm cancellation: once every second for When the Status LED Indicator Audible Alarm Action 5 seconds. temperature drops below the alarm Standby Mode The LED ashes None threshold, the red once every alarm signal will 60 seconds.
-
Page 12: Alarm Mode
units in the network will follow suit—they will beep 4 times every 5.8 seconds, paired Malfunction The LED ashes red 2 beeps every 60 Replace the unit with the LED that ashes red 4 times rst, followed by the LED that ashes green once twice every 60 seconds. -
Page 13: Technical Specifications
7. When removed, place the heat alarm back in its proper location as soon as Operating Frequency 868 MHz possible, to assure continuous protection from re. Maximum Number of 24 wireless units (only compatible with X-Sense 8. When household cleaning supplies or similar contaminants are used, the area Interconnected Units Link Pro and Link wireless alarms) should be ventilated. -
Page 14: Troubleshooting
False alarms • Check the location of your heat alarm (see “Installation triggered Positioning”). X-Sense Innovations Co., Ltd. intermittently. • Do not install too close to a heat source. Address: B4-503, Kexing Science Park, 15 Keyuan Road, Shenzhen, 518057, CHINA Email: support@x-sense.com...
Need help?
Do you have a question about the Link+ Pro XH02-M and is the answer not in the manual?
Questions and answers