5.5
Page Alert Duration
This feature allows you to set the duration of page alerts.
The following are the two available options:
Fixed
You can set the duration to a fixed value between 0.5 seconds to 2 minutes.
Standard
The alert lasts for a standard duration of two tones.
NOTE: If the duration is fixed and is longer than the duration of the second device activation tone, you
can miss part of the message or the entire message depending on the message length.
5.6
Unread Message Reminder
This feature allows you to enable or disable the message reminder.
The following are the two available options:
On
Unread message reminder enabled.
Off
Unread message reminder disabled.
5.7
Priority Tone Alert
This feature allows you to override the vibrate setting of the function switch for Call Address 1 on Frequency
1 to a tone alert position.
The following are the two available options:
On
The device generates a tone alert instead of vibrating to indicate an incoming message when the alert
type is set as vibrate for the function switch.
Off
The device generates vibrate to indicate an incoming message when the alert type is set as vibrate for the
function switch.
5.8
Warning Alert
This feature allows you to enable or disable the warning tone.
The following are the two available options:
On
Emit loud alert tone to warn the surrounding of a critical situation.
Off
Disable warning alert.
MN010351A01-AA
Chapter 5: Device Programming Software
21
Need help?
Do you have a question about the MINITOR 7 and is the answer not in the manual?
Questions and answers
how do you clear out pages from the pager