Motorola Bravo Express Operating Instructions

Turning the Pager On:
• Press the READ button.
The pager will alert indicating that the pager is on.
A
The power-on symbol ( ) and an alert indicator will appear
on the screen to indicate whether the pager is in the Silent (V)
or the Audible (S) mode.
Receiving and Reading Messages:
When a message is received, the pager will alert for 8 seconds.
• Press the READ button to stop the alert.
• Press the READ button again to display the message.
• Press the SELECT button twice while reading the message
to return to the main status screen.
Messages that contain more than 12 characters are displayed on
a second screen. The symbol (N) indicates that there are
additional screens. The second screen is displayed
automatically after 8 seconds, or you can press the READ
button to advance to the second screen. The last screen of the
message displays the time that the message was received.
If a message is left unread, the pager emits a reminder alert
every 2 minutes, and the number of unread messages is
displayed on the screen (i.e., 1 Page, 2 Pages).
Turning the Pager Off:
• Press the MENU button until the "PAGER OFF?" prompt
appears on the display.
• Press the SELECT button to turn the pager off.
The clock will be displayed on the screen, but the "On"
indicator will not.
CONTROLS
BRAVO EXPRESS
READ MENU SELECT
BUTTON BUTTON BUTTON
BATTERY DOOR
Slide Door to Left
(+ End of Battery to Left)
DISPLAY ICONS
ON
INDICATOR
PAGER
ALERT
AUTO
INDICATOR
CLOCK
Turning On the Light:
• Press the SELECT button while the clock or a message is
displayed to turn the light on.
• To turn the light off, press the SELECT button again while
the message or the clock is displayed, or allow it to timeout
automatically after 8 seconds.
The light cannot be turned on while scrolling through the menu.
Changing Alert Modes:
• Press the MENU button. Either "SILENT?" or "AUDIO?"
will appear depending on which mode the pager is currently
in. For the pager to vibrate, it must be in the Silent mode.
• To change the alert mode, press the SELECT button while
your choice appears on the display.
Pager Auto:
You can set the pager to turn on and off at designated times.
• Press the MENU button until your choice of "PGR AUTO?"
or "PGR MANUAL?" appears on the display.
• If you press the SELECT button while "PGR AUTO?" is
displayed, the pager will turn on and off at the times that
appear on the display.
• If you press the SELECT button while "PGR MANUAL?"
is displayed, you will need to turn the pager on and off
yourself.
LOW CELL • Press the READ button to return to the main status screen
INDICATOR
after viewing the on/off times.
Set Pager Auto:
• Press the MENU button until "SET AUTO" appears on the
display.
• Press the SELECT button.
• To set the "On" time, press the MENU button until the
desired hour appears. When the desired hour is displayed,
press the SELECT button to move to A.M. or P.M. Press the
MENU button again to change from A.M. or P.M. Repeat
this step to set the Off Time.
• Press the READ button to return to the main status screen.