Operating Instructions - LF Harbor Breeze BOLTZ III 43349 Instruction Manual

OPERATING INSTRUCTIONS

1. To operate the fan using remote control, press and
release the following buttons:
LED Indicator - Indicates the three speeds of the fan. It
should illuminate when any remote button is pressed. If
not, replace the 1.5V, AAA batteries.
Fan Power button has three options:
( ) - Turns the fan off or turns on fan at previously
selected speed.
( + ) - Increase fan speed
( ) - Lower fan speed
Sleep Timers - Turn off fan after 2 hours (2hr), 4 hours
(4hr), or 8 hours (8hr). Press (
Light Delay - Delays turning off light for one minute
which allows safe exit from room. Light blinks to
confirm function is active. Press Light Control button to
deactivate and turn the light off.
Home Shield™ - Simulates occupancy while away from
home. Fan remains off and the light randomly turns on
for a minimum of five minutes and a maximum of 20
minutes. The light remains off for 60 minutes between
events. Press and hold button to activate. Light will blink
to confirm Home Shield is active. Press any button to
cancel.
Variable Breeze - Simulates a natural breeze, as if you
were outside.
Light Control - Tap button to turn the light off and on.
Press and hold button to dim or brighten the lights.
Light Color - Press and hold button to cycle through the
color temperatures from 2200K (warm white) to 6500K
(daylight).
2. LEARN - Syncs remote control to receiver (see
troubleshooting for instructions).
) button to deactivate.
13
1
Light Delay
Light Control
Front
2
2
LEARN
Back
LED
Indicator
Fan Power
Sleep Timer
Variable Breeze
Home Shield
Light Color