Table of Contents
Advertisement
TOOLS MENU
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Tools" menu, press "Sitelink3D" and select.
"Sitelink3D" menu is displayed.
SETTING CONTENTS BY Sitelink3D MENU
On "Sitelink3D" menu, you can set the following.
(1) "Network connection..."
You can perform the setting for connecting the control box to
the Sitelink3D.
(2) "Operator" (*)
You can select the operator.
(3) "Activity" (*)
You can select the name of activity.
(4) "Delay" (*)
You can select the delay information.
(5) "Material" (*)
You can select the soil type information.
(6) "Export data..."
You can send the Surface file via network to the devices (control box, 3D-Office, etc.) which are connected to
the Sitelink3D.
(7) "View messages..."
You can view or delete the received messages.
(8) "Tasks..."
You can open the task menu of the Sitelink3D.
(*): The list of information set at the WebPortal is displayed. Select the item from the list. For the item which is
not set at the WebPortal, only "<none>" is displayed.
METHOD FOR REGISTERING ON Sitelink3D
To perform the following procedure, you need to connect the network modem to WebPortal of Sitelink3D before-
hand. For the details, consult your Komatsu distributor.
In order to register on the Sitelink3D, issue the one-time registration code with the WebPortal of Sitelink3D in
advance.
After issuing the one-time registration code, register the control box on the Sitelink3D according to the following
procedure.
4-58
HANDLE CONTROL BOX
Advertisement
Chapters
Table of Contents
