Securing The Machine; Electrical Connection - Miele PDR 914 Quick Start Manual

After the machine has been aligned, screw the nuts on the ad-

justable feet tightly to the base plate using an open spanner.

Securing the machine

The tumble dryer must be secured to the floor by fitting the tension-

ing strips supplied over the machine feet.
Fittings supplied are for bolting the machine to a concrete floor. For
other types of flooring, please purchase suitable fastening materials
separately.

Electrical connection

The electrical connection must be established by a qualified electri-
cian.
The electrical connection may only be made to an electrical system

provided in accordance with all appropriate local and national legisla-
tion, regulations and guidelines. Please also observe the regulations
set out by your insurance provider and energy supplier, accident pre-
vention regulations, as well as recognised codes of practice.
Reliable and safe operation of this tumble dryer is only ensured if it

has been connected to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be
found on the data plate on the tumble dryer. Ensure that the supply
voltage matches the voltage quoted on the data plate before estab-
lishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the
data plate can damage the tumble dryer if the voltage is too high.
If more than one voltage is specified on the data plate, the tumble

dryer can be converted for connection to the relevant input voltage.
This conversion must be performed by the Miele Customer Service
Department or by an authorised dealer. During the conversion, the
wiring instructions given on the wiring diagram must be followed.
en - Installation
135