Miele PDR 914 Quick Start Manual page 131

Cleaning the drum and the outside of the casing
 Risk of death due to electric shock.
The tumble dryer must be completely disconnected from the power supply before per-
forming cleaning or maintenance work.
Before starting cleaning or maintenance work, always switch off the tumble dryer at the
main switch (on site).
Do not use a pressure washer or water jet to clean the tumble dryer.
 Risk of damage due to solvent-based cleaning agents and abrasive cleaners.
Solvent based cleaning agents, abrasive cleaners, glass cleaners or all-purpose cleaners
can cause damage to plastic surfaces and other parts.
Clean the tumble dryer with a slightly damp cloth and a mild non-abrasive cleaning agent
or soapy water.
Clean the seal around the inside of the door with a damp cloth.

The tumble dryer drum must be wiped clean with a soft, damp cloth after drying items

that have been starched.
Dry all parts with a soft cloth.

The drum and other stainless steel parts can be cleaned with a suitable stainless steel

cleaner if you wish.
The air intake vent is located on the rear of the tumble dryer.
This vent must never be covered or blocked with objects.
Keep the area around the tumble dryer – in particular the air intake – clear of fluff.
en - Cleaning and maintenance
131