Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Before installation Key installation requirements Location considerations Electrical requirements Installation What’s included Step-by-step installation STEP 1 Connect the electrical wiring STEP 2 Level the dryer Drain hose (if necessary) Installation checklist...
Page 3
Maintenance Control panel Tumbler Stainless steel tumbler Dryer exterior Lint filter Water tank Heat exchanger Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet Cycle chart English 3...
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features.
CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes. • To reduce the risk of severe injury or death, follow all installation instructions.
Page 6
Safety information 10. Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user-maintenance instructions or in published user- repair instructions that you understand and have the skills to carry out. 11.
WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.
Page 8
Safety information • Do not use fabric softeners or products to eliminate static unless the softener or product is recommended for dryer use by the manufacturer of the fabric softener or product. • Clean the lint screen before or after each load. • Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt.
Before installation Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board, Motor, Drain pump.
Page 10
Before installation Undercounter installation 34.4 in. (875 mm) 23.6 in. (600 mm) 1 in. (25 mm) 1 in. (25 mm) Side by side installation 1 in. (25 mm) 25.6 in. (650 mm) 23.6 in. (600 mm) 1 in. (25 mm) 1 in.
Page 11
27.1 in. (688 mm) 6 in. (152 mm) 2 in. (50 mm) 67 in. (1702 mm) WARNING Samsung’s washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. English 11...
Before installation Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of a malfunction or breakdown, the ground WARNING will reduce the risk of electrical shock by • Improperly connecting the equipment providing a path of least resistance for the grounding conductor can result in a...
Page 13
Electrical connections • Grounding through the neutral conductor is prohibited for (1) new Before operating or testing, follow all branch-circuit installations, (2) mobile grounding instructions in the “Grounding” homes, (3) recreational vehicles, and section. An individual branch (or separate) (4) areas where local codes prohibit circuit serving only your dryer is grounding through the neutral recommended.
Before installation, make sure the dryer has all the parts listed here. If the dryer and/or parts are damaged or missing, contact the nearest Samsung customer service center. Dryer at a glance...
Page 15
• The stacking kit allows the dryer to be stacked on top of a washer. Please note that the stacking kit can only be used with Samsung washers and dryers. To purchase a bracket stacking kit, contact a Samsung service center or local appliance retailer. The stacking kit differs with the washer model.
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow the instructions on this page or the next page. Instructions for a 3-wire system are on this page. Instructions for a 4-wire system are on the next page.
Page 17
For a 4-wire system Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
Installation • Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. • A strain relief must be used. • Do not loosen the nuts already installed on the terminal block. Be sure they are tight. • Use a 3/8”...
Page 19
NOTE • The dryer can be levelled using either or both of the front and rear legs of the dryer. • To set the dryer to the same height as the washer, fully retract (C) the levelling legs by turning them counter clockwise, then loosen (D) the legs by turning them clockwise.
Installation Drain hose (if necessary) Important: This dryer comes with a built in water tank that stores water captured by the dryer from drying clothes. The water tank must be emptied manually before or after each load. See page 45. However, you can install the provided long drain hose as described below and have the water empty directly into a nearby sink or...
Page 21
2. Insert one end of the accessory hose (the long drain hose) into hole (A). 3. Position the other end (the outlet) over a laundry sink or connect it to the drain pipe of a laundry sink. See the instructions below or on the next page. Over a laundry sink: 1.
Page 22
Installation CAUTION • Connect the hose guide (A) within 6 in. (15 cm)* of the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the dryer.
Installation checklist • The dryer is plugged into a properly grounded outlet. • All packaging material is completely removed and properly disposed. • The dryer is level and standing firmly on the floor. • The long drain hose is installed if you want water captured by the drying process drained automatically.
Installation Switching the door position To reverse the direction of the door, we recommend that you contact a qualified technician and have the technician follow the directions below. 1. Remove the door packing from the door. Remove the screws on the inner glass holder of the door.
Page 25
Remove the hinge screws, and then detach the door. - Loosen and remove the 2 bolts on the door frame. - To prevent abrasion on the bolts, use a hex screwdriver. Remove the 2 holder screws on the left frame, and then remove the 2 bracket screws on the right frame.
Page 26
Installation Remove the bottom screw on the right frame, and then insert it in the corresponding hole on the left frame. Insert the 2 removed bracket screws in the left frame as shown. - See the figure on the left for the correct position of the screws.
Page 27
11. Insert the inner glass holder in the door cover that has been installed on the right frame. 12. Tighten the 3 screws on the top and 3 screws on the bottom. 13. Attach the door packing to the door. English 27...
Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a time. • Overloading reduces the tumbling • Do not mix heavy and lightweight items action, resulting in uneven drying and together.
Operations WARNING To reduce the risk of fire, electric shock, or injury, read the “Safety information“ section before operating this appliance. Control panel DV22N685*H* DV22N680*H* Turn the cycle selector to select a desired cycle. When a cycle is 01 Cycle selector selected, the cycle indicator lights up.
Page 30
Operations Press to adjust the dryness in the Sensor Dry cycles. The corresponding indicator turns on. • Larger or bulkier loads may require More for complete dryness. 03 Dry Level • Less is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Page 31
After connecting the dryer to your home network using the SmartThings app, you can control the dryer remotely. The Smart 09 Smart Control Control indicator blinks. The dryer enters waiting mode for (DV22N685*H*) remote commands. For more information, see the SmartThings section on page 38.
Operations Water Tank Full Damp Alert Drum Light Simple steps to start Press Power to turn on the dryer. Turn the Cycle Selector to select a cycle. Change the cycle settings (Dry Level and Time) as necessary. Optionally, you can activate options available by pressing the relevant button. (Adjust Time - and +, Wrinkle Prevent, and/or Damp Alert) Press and hold Start/Pause (Hold to Start).
Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dry Level. Cycle Description For most fabrics including cottons and linens. NORMAL MIXED LOAD For mixed loads consisting of cotton and synthetic fabrics.
Operations Manual Dry You can change the drying settings manually to your preference. Cycle Description For drying light cotton synthetics or items that need quick drying. 40' EXPRESS The default dry time is 40 minutes. TIME DRY You can specify a cycle time in minutes. AIR FLUFF Tumbles the load in room temperature air.
Page 35
Cycle Description Do not dry on a heat setting. Use AIR FLUFF. Foam Rubber (rug backs, stuffed toys, WARNING shoulder pads, etc.) Drying a rubber item with heat may damage it or cause a fire. Use NORMAL. • Add a couple of dry towels and a pair of clean sneakers to Pillows help the tumbling action and to fluff the pillows.
Operations Special features My Cycle Child Lock You can create your own cycle that Child Lock prevents children from playing contains your preferred settings and use it with the dryer. When Child Lock is at your convenience. activated, all buttons except for the Power button are disabled.
Page 37
To use Smart Care, you must • If you hold the smartphone at an angle have the Samsung Smart Care app installed to the dryer’s display, the smartphone on your smartphone. may not recognize the information code.
• If your Internet provider has registered the MAC address of your PC or modem for permanent use, your Samsung dryer may not connect to the Internet. If this is the case, contact your Internet provider. • The Internet firewall may interrupt your Internet connection. If this happens, contact your Internet provider.
Page 39
Log in You must first log into SmartThings with your Samsung account. To create a new Samsung account, follow the instructions in the app. You don’t need a separate app to create your account. NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone user automatically logs in.
Page 40
Operations SmartThings Category Checkpoint Description You can check the current cycle and Drying status its options, and the remaining cycle time. The Smart Control status is shown Smart Control for the dryer. Monitoring Use this to check if the dryer Self Check operates normally.
Page 41
Category Checkpoint Description You can select the fabric type, dry level, and wrinkle prevent to get Laundry Recipe * recommended options and dry cycles that you can start right away. You can set the desired time for a dry cycle to finish. After you set the desired time, you Laundry Planner * will get a recommended cycle that...
Page 42
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
Maintenance WARNING • Do not clean the dryer by directly spraying water onto the dryer. • Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discoloration, deformation, damage, electric shock, or fire. • Before cleaning the dryer, be sure to unplug the power cord. • Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing.
Page 44
1. Open the door and pull the lint filter upward to remove. 2. Open the outer filter and remove the inner filter (A). 3. Unfold both the inner filter and the outer filter. 4. Remove the lint from both filters, and then clean them in running water.
Water tank To avoid leaks, empty the water tank after every load. 1. Using both hands, pull the water tank (A) forward to remove. 2. Empty the water through the drain hole (B), and then put the water tank back into place.
Heat exchanger Clean the heat exchanger at least once a month. As a reminder, the heat exchanger indicator ( ) lights up on the display when the heat exchanger needs to be cleaned. 1. Gently press the top part of the outer cover (A) to open.
Page 47
4. Clean the heat exchanger with a soft brush or vacuum cleaner. WARNING • To avoid physical injury and burns, do not touch or clean the heat exchanger with bare hands. • Do not use water to clean the heat exchanger.
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet.
Page 49
• The drying time can change according to the type and amount of laundry. See the cycle chart for reference. • To prevent an overly long drying time, load no more than half full. If a problem persists, contact a local Samsung service center. English 49...
• Try restarting the cycle. Check the motor for operation. • If the information code continues to appear, call for service. If any information code keeps appearing on the screen, contact a Samsung service center. English...
Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, Only non-chlorine (color-safe) ironing, and dry cleaning. The use of bleach (when needed) symbols ensures consistency among garment manufacturers of domestic Tumble dry and imported items.
Specifications Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment...
Specification sheet Type Front loading dryer A. Height 33.5” (850 mm) B . Width 23.6” (600 mm) Dimensions C. Depth 25.6” (650 mm) D. Depth with door 44.3” (1125 mm) open 90° 110 lb (50 kg) Net Weight Electrical 240 V / 60 Hz 800 W Requirements Allowable Temperature...
Specifications Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load: Fill the drum to about ½...
Page 55
NOTE : factory setting, : can be selected • Dry Level setting Cycle More Normal Less NORMAL MIXED LOAD (DV22N685*H*) HEAVY DUTY SMALL LOAD (DV22N685*H*) SHIRTS Sensor Dry ...
Page 56
Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that cause...
Page 57
The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;...
Page 58
If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
Page 59
Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. EXCLUSION OF IMPLIED WARRANTIES...
Page 60
PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Page 61
If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
Page 62
God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
Page 63
Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 63...
Page 64
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT 1-800-SAMSUNG (726-7864) U.S.A www.samsung.com/us/support 1-844-SAM-PAYS (726-7297) 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) CANADA 1-844-SAM-PAYS (726-7297) www.samsung.com/ca_fr/support (French) DC68-03650E-03...