Smartstart - Miele G 7650 Operating Instructions Manual

Settings
Running a RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be
provided in the Miele app.
A message will appear in your dish-
washer display if a software update is
available.
You can install the update immediately
or postpone it until later. When the ap-
pliance is switched on again, you will be
reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
Updates may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the dishwasher off dur-
ing the update. Otherwise, the up-
date will be aborted and will not be
installed.
- Some software updates can only be
carried out by Miele Service.
42

SmartStart

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Settings – Miele@home").
The function is used for start-
SmartStart
ing your dishwasher automatically at a
time when your energy supplier's elec-
tricity tariff is most economical.
To use this function you may need fur-
ther technical accessories.
If you have activated
ted , the Timer  menu of the selected
programme will no longer show
but will instead show
"Options – Timer"). The dishwasher will
then start within the timeframe specified
when it receives a signal from the en-
ergy supplier.
If it has not received a signal from the
energy supplier by the latest possible
start time, the dishwasher will start
automatically.
SmartStart Permit-
EcoStart
SmartStart (see