Display Functions - Miele G 7650 Operating Instructions Manual

Display functions

The display is used to select or set the
following:
- The programme
- The timer
- The
Settings 
The display can show the following:
- The programme stage
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls dur-
ing this time.
Touch the  sensor control to switch
the dishwasher back on.
Guide to the appliance
The OK sensor control is used to con-
firm a message, setting or programme
and also to move to the next menu or
another level.
Under  Further programmes/settings,
a scroll bar  will appear in the right of
the display. This offers further options.
These options can be shown using the
 sensor controls.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option that is selected will have a
tick  next to it.
To exit a sub-menu again, use the
 Back sensor control.
If you do not press any sensor controls
for several seconds, the display will re-
vert to the previous menu level. You
may then have to enter your settings
again.
21