Problem Solving Guide; Technical Problems - Miele G 7650 Operating Instructions Manual

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
This section only lists faults that you can remedy yourself. All other faults are
shown in 
Fault F

Technical problems

Problem
The dishwasher will not
start.
The  sensor control
does not respond or
only responds once it
has been touched sev-
eral times.
108
.
Cause and remedy
The door is not closed properly.
 Raise the door upwards until the catch engages.
The dishwasher is not plugged in.
 Insert the plug and switch on at the socket.
The mains fuse has tripped.
 Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
 If the mains fuse trips again, contact the Miele
Customer Service Department.
The dishwasher is not switched on.
 Switch the dishwasher on using the  sensor con-
trol.
Energy management: the door was opened or closed
shortly before the  sensor control was touched. As
a result, the dishwasher was already switched on.
The electronic module requires a few seconds to be
ready for operation.
 Wait a few seconds after opening or closing the
door.
 Then touch the  sensor control.