Table of Contents
Advertisement
English
12
Brewing decaf coffee
Programming drink volumes
10 When the led stops blinking, your coffee is ready. Enjoy your Espresso or
Lungo brewed from freshly ground coffee beans.
11 When all leds are off, the portafilter can be removed. Remove the portafilter
from the machine to empty it. Invert the portafilter over a bin and press the
ejection button to remove the coffee puck from the portafilter.
Note: Empty the portafilter after every coffee brew.
The machine provides also an option to brew decaf coffee using pre-ground
coffee powder.
1 Add decaffeinated ground coffee (max. 10g or one full tablespoon) to the
portafilter.
2 Insert the portafilter into the machine.
3 Make sure the water container is filled with water.
4 Place a cup under the coffee spout.
5 Press and hold the Intensity boost button for 5 seconds until the button starts
blinking slowly.
6 The machine heats up and starts dispensing water through the portafilter to
brew your decaffeinated coffee. The led is blinking slowly.
7 Press the Intensity boost button again when you have reached the volume of
coffee you want. Your decaf coffee is now ready.
Each coffee button is programmed to brew coffee at its ideal setting.
Nevertheless, you can adapt the volume of the drink buttons to your wishes and
save your preference in the machine. The machine then brews your preferred
amount of coffee every time.
Note: Only the volume of the drink buttons can be programmed. The Intensity
boost button cannot be programmed and/or selected during programming
mode.
Advertisement
Table of Contents
