Philips baristina BAR300 Manual page 24

Problem
Milk escapes from under the lid.
The milk is not very hot.
Not all milk has been frothed.
Possible cause
You used a type of milk that is not
suitable for frothing.
The inside of the milk jug is polluted
with milk residues, which prevents
the coil holder from rotating.
You put too much milk in the milk
jug.
This is normal.
This is normal.
English
Solution
Many factors can influence
the quality of the milk froth
(like protein content). If the
milk does not froth as you
would like, try a different type
or brand of milk. Use semi-
skimmed cow's milk at
refrigerator temperature for
the best frothing result.
Clean the coil holder and the
inside of the milk jug.
Do not fill the milk jug
beyond the MAX indication.
The milk is heated up to
approx 74°C to ensure the
best froth and taste. Milk
proteins start to break down
and burn if the milk is
overheated.
The appliance does not froth
all the milk. The appliance
created the optimal milk-
froth ratio. The milk easily
mixes with coffee or other
beverages and the milk froth
stays on top for a delicious
head.
27