Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
NOTE: E
ESE EET
STTEE ARLES
1. Move the sidestand down.
This check is most reliable if performed with
2. Make sure that the engine stop switch is set to "CQ".
a warmed-up engine.
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
:
:
The neutral switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
The sidestand switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
The clutch switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The system is OK. The motorcycle can be ridden.
3-20
Advertisement
