Figure 84. Installing the M.2 SSD
9. Slide the BOSS S2 card carrier into the BOSS S2 module slot.
10. Close the BOSS S2 card carrier release latch to lock the carrier in place.
Figure 85. Installing the BOSS S2 card carrier
Next steps
1. If removed,
install the air
2. Follow the procedure listed in the
Front mounting front PERC module
This is a service technician replaceable part only.
Removing the front mounting front PERC module
Prerequisites
1. Follow the safety guidelines listed in the
88
Installing and removing system components
shroud.
After working inside your
Safety
instructions.
system.